First, thanks for reading this. I'll start with vehicle info.

2006 cobalt SS/SC
Pioneer package
XM capable but not subscribed (probably never will be)
No onstar


I think that covers all the basics. Now, I'm buying a pioneer avic d3 headunit today. The guy I'm buying it from has the following to say about the unit:

"I am selling a lightly used avic d-3 with bluetooth modules, ipod cables,parking break bypass, and pac steering wheel contol module. All harnesses and wires are included. thanks.
price is 400...obo"

He has offered to install the headunit for free. I know jack **** about installing electronics. I've read around the forums and none of it means anything to me and the information seems a bit to scattered to give to the guy.


My question is this; with the information listed above, what do I need to purchase to make the install go smoothly?

Please note this unit is NOT currently installed in a cobalt.

 

You need a double din kit and a wiring harness. Not completely sure but I believe the wiring harness for the premier system is different than stock, so make sure you get the right wiring harness. You'll also need a GM antenna adapter.

The PAC module is a +. Great deal though, make sure he demonstrates that EVERYTHING on the radio works before he deuces. I almost got screwed on my radio....brand new from factory it didn't load discs properly, the motor was kaput and I found out just in the nick of time before the return period was up.

Oh, and assuming he doesn't buy the little things, you'll need either wire nuts, butt connectors, or solder, as well as some electrical tape and zip-ties.

Just noticed you lived 40 minutes from me too...If you need help hit me up.

 

You're the man. Thank you.

Also, I'm fairly certain he'll have all that because he said he does it for a living.

 

No problem....can't believe they censor the "@ss" in "@ssuming"

 

also, you any good at photoshoping? from the looks of your sig you are.

 

Look in the how to's I did a full write up with pics on installing an AVIC F900 shouldnt be that much different. also has the PAC module installed.

pics may help

 

that your ride in your sig? How much did that widebody kit cost you if so lol

 

I do alright. I did my sig, photos and all, on my phone.

 

Also, could I trouble you guys for links to the antenna adapter and wiring harness. I already ordered the dash kit.

Edit- Scratch that. The guys shop got me everything but the dash kit for $55.

Everything will be installed when the dash kit comes in the mail.