Okay, a few months back i disconnected my stock pioneer sub, and used the speaker level inputs for a powered amp + sub. Now I installed a new head unit and have my amp running through RCAs, and the speaker level is not needed so I want to hook up my stock sub again, BUT i snipped the wires...
SO I looked around to see which wires go to which but I cant find it anywhere
can anyone tell me which wire connects to which (at the sub) aka grn/blue wires connecting back to the black/red wires.
Thanks

 

I've posted this quite a bit but I'll humor you:

http://i278.photobucket.com/albums/k...wnvwgm/3-1.gif

There's your wiring diagram.

 

okay, unless im missing something that doesnt seem to help because the wires im trying to connect dont match any of those colors listed. Im using the wires that are located AT the sub, not the deck. They are red and black wires, connect to those (grn ect) wires. Im talking about the ones that connect using those small harness' , which I snipped off

 

Just remove the sub from the enclosure, desolder the old wires and run new ones.

 

So I am using the speaker level inputs for my amp and I have 8 Pins to the amp and 4 pins from the stock connector. My question what 4 wires should I be connecting to on the amp side? should I be using a left and right speaker or a front and back speaker?