Custom Turbo Kit Installed!
#1
Senior Member
Thread Starter
Join Date: 05-07-08
Location: North Vancouver BC
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Custom Turbo Kit Installed!
Hey guys sorry I havnt posted been really busy with life. I leave for school in Feb got engaged in Aug and working my butt off to pay for everything. I have the car back it isnt tuned yet but I got some pictures of the installed kit. I will post pictures of the install too. Also I got some free time the other day and took my car out to tune it well when ever I disable everything to tune the maf my air fuel goes to 10.2 and no matter what I do to the maf it wont move from that. So any help would be great. well here are the pictures.
Billet Precision 5857 Turbo 44mm Tial waste gate and Tial blow off valve. I have a 4 1/2 intake with a big filter on it. The turbo spools 20psi by 3500-4k rpm without even being tuned.
Billet Precision 5857 Turbo 44mm Tial waste gate and Tial blow off valve. I have a 4 1/2 intake with a big filter on it. The turbo spools 20psi by 3500-4k rpm without even being tuned.
#8
Senior Member
Thread Starter
Join Date: 05-07-08
Location: North Vancouver BC
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Street Solutions did the whole kit for me. Its a buddy of mine in the same car club as me. The intake mani he charged me like 300$ for it and its taped on the bottom for the map and all that great stuff.
The welds look awesome for aluminum.
The welds look awesome for aluminum.
#11
Senior Member
Join Date: 04-08-09
Location: Jonesboro,Arkansas
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
Wow guys...if you can find something to bitch about you will geez. Honestly its look pretty damn professional than some of the other turbo builds we see and who's going to be looking that close to the damn welds. If it holds and there are no leaks then more power to him.
#13
Senior Member
iTrader: (1)
Join Date: 04-02-06
Location: cali
Posts: 754
Likes: 0
Received 0 Likes
on
0 Posts
Wow guys...if you can find something to bitch about you will geez. Honestly its look pretty damn professional than some of the other turbo builds we see and who's going to be looking that close to the damn welds. If it holds and there are no leaks then more power to him.
i said i liked the build and that overall it looked good. and more people look at welds than you might think.
#14
Senior Member
Thread Starter
Join Date: 05-07-08
Location: North Vancouver BC
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
Not sure what gauge the mani is but I can find out for ya. He wants to make some more and sell them to lsj owners they would be tapt for the map, hoses and scip. I will try to get a shot of the welds because they really arnt that bad he sanded them and polished them so that could be why they don't look good in the picture. None of the welds leak. If somone wants this kit or a intake like mine pm me I can get you some prices.
#25
Senior Member
Thread Starter
Join Date: 05-07-08
Location: North Vancouver BC
Posts: 910
Likes: 0
Received 0 Likes
on
0 Posts
I just got back from the dyno my ebay boost controller wasnt working so I only made 10psi and couldnt get pasted 10psi So I ordered a hallman boost controller and will be back pushing 24psi.