Think This will Help Airflow!
#1
Senior Member
Thread Starter
Think This will Help Airflow!
I,ve been wanting to do this for a while but haven't had the time with the new Baby & all, But he is getting a Little older now soooo he can Hang out in the garage with Dad!
I took apart the Supercharger this weekend & Did a Little Porting, The out port I didn't take a whole lot off but enough! Then I Polished it the best I could some areas are Hard to reach. I know just with the mound of Crap I took off the inside I know it will help the Airflow! Enjoy the pics
Before:
Think this ridge disruptes the air a little & it's Not build up, It's Metal!
After sanding!
After Polishing:
I took apart the Supercharger this weekend & Did a Little Porting, The out port I didn't take a whole lot off but enough! Then I Polished it the best I could some areas are Hard to reach. I know just with the mound of Crap I took off the inside I know it will help the Airflow! Enjoy the pics
Before:
Think this ridge disruptes the air a little & it's Not build up, It's Metal!
After sanding!
After Polishing:
#7
Senior Member
Thread Starter
Ty , It's a pain when you have big hands!
Yes I know that Didn't touch them, some day I will fill them!
Hell no it is not needed thanks to that thread Edubs posted it reafirmed what I wanted to do!
I also did the Thottle Body & got rid of the rough surface & ridges!
Hell no it is not needed thanks to that thread Edubs posted it reafirmed what I wanted to do!
I also did the Thottle Body & got rid of the rough surface & ridges!
#10
Senior Member
Thread Starter
#13
Senior Member
Thread Starter
#16
Senior Member
Thread Starter
Ty man I try hard & Take my Time!
Well I have 2 recent Dyno runs so I know what I'm putting Down, It will be nice to see what it does when i get back on it! I am also wondering how much it will help Intake temps!
Well I have 2 recent Dyno runs so I know what I'm putting Down, It will be nice to see what it does when i get back on it! I am also wondering how much it will help Intake temps!
#19
Senior Member
Thread Starter
#20
Senior Member
Thread Starter
Bump took it for a Ride today & the Supercharger is Louder, The Response time down low is much quicker than before! As soon as you hit the gas you can start to here the Supercharger scream! Now I can't wait to Dyno to see if it made any difference in HP numbers!
#24
Its called quicksteel my friend lol. We did it to my blower and has held up good for a month now. She does scream better when u beat on her lmao didn't sound good at all
Thread
Thread Starter
Forum
Replies
Last Post
thmotorsports
Supporting Vendor Deals & Group Purchases
514
04-23-2012 09:24 PM