So ever since I installed my Magnaflow system it hangs down kinda low and scrapes ocassionaly, until now. I was on JBP and they now have Poly Exhaust hangers woot woot.
75 for the set not to shabby.

http://www.jbodyperformance.com/new/...catName=JP0964

 

Those will stretch a whole bit and make it lower you'll need to wrap them in a hose clamp or something to keep it where it is supposed to be.

 

my dc sports uses the stock rubber thingys... it sticks like the stock one does... or maybe im not thinking the same thing.

 

My Middle section hangs really low and ocassionally scrapes going over bumps and stuff

 

cant you find them somewhere cheaper for less than 75? that seems expensive for hangers....

 

i got some at auto zone for $3 a piece. not a name brand or anything but it does the job

 

yea i was thinking something along that line 75 for a set is way too much for something you wont even see, and wont even make any noticable difference in performance...

 

WOW that is a rape

 

have any solutions for this?

[IMG][/IMG]

and this?



and this leak. It is leaking her and on the top of that joint.

 

you realize those poly hangers wont raise your exhaust at all? They just keep it from swinging around during tunrs, which helps contribute to overflexing the flex joint part, which will reak the exhaust. It will still be at the same height tho

 

hey SSinPA what length is that resonator? hows it sound? just curious

thanks

 

70 bucks for a hanger just get the exhaust strap they sell at autozone its like 3 bucks did the job for me and it tucked it really nice

 

the resonator is the one that comes with the magnaflow catback it sounds pretty good but i have a leak so as soon as it is fixed i will know for sure.

 

2 bolt flanges suck , they tend to bend in the ears and cause a leak. U could try to double gasket the DP to resonator flange but it doesn't always work.

 

so there isn't a really good fix for it? Am i supposed to just live with a leaky exhaust.

 

for 75, i can have mine cut and welded back together.......

 

where would you cut and weld?

 

Bro I told you like a month ago just to get a new gasket.. Have you done that yet?

 

i just did like the second poster and wrapped my stock one in a hose clamp

 

before the spot where it hangs low, then they would just twist it upward and reweld it

then adjust the hangers so it hangs fine

 

yes i got a new thicker gasket but it didn't fix the leak.

 

my muffler tip sits to the left alittle to far, i find myself kicking my muffler back in place,.... lol any fixes?

 

My exhaust used to hang low too and I'm lowered so i scrape here and there too. My fix- Use a coat hanger and wrap it around the two metal brackets a few times and cut off the extra, but leave the rubber hanger on there too. Hope this helps!