the spacers are 1" the tires are 225/45/18 and it rubs if you don't do any pulling or trimming in the front wheel well , the back pokes a bit , but it looks like a good pull should solve it, but the back only really needs a 1/2" spacer to bring the stock wheels flush.

 

Holy foggy headlights batman!

 

The seal is broken. They have been oppend twice im not doing it again. Gonna order some new ones.

 

not sure what happened.. I was just cruising through town when suddenly after going from a stop light it started making TERRIBLE popping noises when in boost. I'm 95% certain its injector seals due to me running E but this isnt no "popcorn pop" like most people claim. its freaking loud. it seems to idle fine, the logs look good for what they are worth (fuel trims are a bit crazy), and the plugs look good, so yeah.. fingers crossed its just injector seals



then to make matters worse, I was cruising in my DD (the miata) last night and did a typical 3-2 downshift and the freaking thing got jammed into second and wont come out.. so its looking like the trans is shot...




cliffnotes: both my freaking cars are undriveable

 

I looked at mine through the window.

 

Dropped engine and transmission to replace crankshaft and now trying to seperate the block..

 

I want the center caps! Are those genuine GM? If so i want the part number! lol

 

Finally finished polishing it. Took forever but looks great and almost all wash marks are gone

Then raced a few cars. Beat a is300, a speed3 and an 05 mustang gt. Super easy kills.

 

gave five friends a joy ride in the SS. LOL, i have to start getting video of their faces when the boost comes on.

 

It was 108 degrees today and me and my boyfriend changed my oil, changed the transmission fluid/filter for the first time in the cars life. And we also changed the fuel filter.

 

Put on my peddar coil overs

 

Painted my wheels white to match the car!

 

looks good come join us in the official white wheel thread.

 

keep them white mrader! im surprised how they look on the LSJ wheels........def should still try and get the TC wheels though lol

 

Over the course of the week:

New Tires
Control Arm Bushings
Ball Joint - Eff those rivets.
Alignment

 

They are the ones that came on the car, i painted the wheels black at one point, and i painted the center caps to match but masked off the bow tie.

 

I'm just gonna leave my LSJ rims chrome and when I black out my headlight and tails, install CF hood an trunk, then I'll consider painting them shift iridescent black. Special paint

 

Ahh I see. I found a set on eBay but can't get the part number. I don't want to paint the caps I have cause I have 2 sets of wheels. One silver and one black.

 

Installed a SS gauge cluster. It's working perfectly and it seems to have less lag.

 

You need a set of center caps?

 

Installed a squeaky sunroof stopper.

 

Well the A/C Felt a little warm so I went to Autozone and got one of those vent thromoters. The tempature out my vent with AC on, max fan and recirc is less then 57 Degrees. Wtih 86F at 60% humidity, 57 degrees is the max acceptable tempature out the vent. So technically my A/C is working properly... Just seems like it SHOULD be colder... maybe Ill give it a few more weeks.

 

got a speeding ticket for going 59 in a 50. like are you kidding me? cop was driving the opposite way on the road as me, spun around and pulled me

 

I would like a set of black ones. lol

 

I got a 87 in a 65 during the past week (on the way to get a tune).

Stupid cops sitting at the bottom of hills.