UPDATED LIST

1.steddy2112
2.marcusicp
3.SrodSS007
4.Black08SSTC
5.SUKXOST
6.red2001ss
7.sherm420
8.IsItFast?
9.Turbo'd SS

N E 1 I miseed at this point in time? just a rough list draft guys

 

SO....this is kinda silly goin back an forth between the IC and piping threads for the GB. I'm not even sure what I'm agreeing to in THIS thread although I do want both. I feel like I gotta check em BOTH all the time now. Maybe we should create another thread for those of us that want both with the combined prices and lowered price for how many people we get. Did I miss something??? Threads keep changing and ya gotta click other links in other threads.....etc UGH!

 

agreed if there is a third thread for the buy for combo buys ill make one now

K guys i made a thread for the combo buy!!!
https://www.cobaltss.net/forums/hahn-racecraft-124/hahn-gb-combo-intercooler-charge-piping-139953/

 

added my name! :P

 

How much would it run me if I wanted 2 of each the pipes set and the intercoolers as well. Do you offer it in yellow as well. My dad and I purchased 2 PPC tuners from HR the other day and for lack of better terms they are ******* awesome. And I would like to do more business with HR. Keep me posted as to when you guys get that BOV up and running.

 

Bump

 

How does this work is there a deposit to pay or just have the money by the end of the G.B.?? I want both but need to be sure I don't have to fork up $1200 right now.

 

no nno good sir.. u would only put in adeposit at the end of the month for the buy. then u would have to pay the rest when yer parts shipped. no biggie.. very simple

 

Well in that case put my name down for both.

 

I have a question.


With this piping will you be able to put a Front sway bar after this is installed? I have been wanting to put one in for the longest time( autocross) but even with stock piping I can't. Anyone?

 

hmmm ask bill this question. im sure it will be able to fit in.. soo we have a total of eleven now... please go to my combo threAad and addd yer name so i can submit it to bill please

 

This wont interfere with a sway bar, as that is under the car. I think you mean strut tower brace, and seeing as how no one has made one for this car yet anyway, its a moot point.

Short answer is there is no way to tell until someone comes out with one, but the ones for the 07 and earlier will not work with even the stock piping in place.

 

Still need those other 2 names added to the combo thread. I just hope I have all the right tools etc to put all this **** on. Anyone know of or seen a thread discussing the installation of the IC and Charge piping? I've never torn apart the front grill or taken it off and not sure if any "special" tools may be required for the install......etc. I wish someone getting the combo lived around here and we could both help one another. My first turbo and don't want to F up my brand new 09 white. NA MEAN!

 

Where is copperas cove, TX?? is that far from houston?

 

Jesus, ok. Sorry, i thought the front sway bar was what you had in the engine compartment in the back. I know TTR has the rear sway bar for this car, who makes the front one? I autocross a lot. Sorry to get off subject.

 

I'm RIGHT next to Ft Hood. Map quest says 202 miles. It's basically NW of where you are in Houston.

 

Well I guess sorry then I can't drive 200mi for a mod day lol, but at least I thought about it.

 

fortunately for YOU.....I'd probably be willing to go down THERE..... IF (and don't take this the wrong way) but if you had EVERYTHING we would need for sure to get it done and done right....it's worth a drive for me. Getting to know someone in the Cobalt community never hurts. You having mods and intel already on these TC's will help me learn them. If read a lot of your posts and feel confident that you know what you're doing but would we get it done somewhere or can we do it all ourselves? You're getting the combo now right?

 

I do all my work myself, and yes I'm getting the combo. I just need to srtaighten my my box a little but all my life I grew up around mechanics so I have plenty of tools. I just want to be sure that the intercooler requires no cutting like the synapse and if it doesn't then it should be easy as pie.

 

seems as though a lot of the posts say that the IC installl does NOT need any modifications to the chasis, front bumper...etc.....due to the curved back design of the sides. But really how many people have put them on so far? Not a lot I think.

 

I read that to but you will not know for sure until the product is actually released and people start installing it. If hahn says no cutting I believe him but theres allways that chance, the piping should be pretty much plug and play, im not worried about it. I'm just worried about the I/C.

 

sending a PM to you

 

You can put me down for both!

 

10!!!! still need a bunch more yo

 

thats like 11 or 12 buddy lol