yeah, it did take a long time to get the car back running. lol

lol depends on if you are looking for ****** you gotta pay for. its called wards corner by little creek and grandby, lol

 

haha thats funny because me and my buddy craig seen a bunch of ***** down through there when we frist got to norfolk

 

Damn, they look good! You went WAY dark too! That is how I want to do my reverse as well.

 

i know the brake lights are really dark... its hard to see them during the day, soi'm going to do a little wet sanding, and clear it again so its a thinner coat, and you can see the lights better, or i just need a brighter bulb for the brake lights

 

she wouldnt have been on the orders and it runs a lil bit deeper than that... i dont really wanna tell too many people right now cause i dont wanna hear the stories and get all the negative feedback on whats going on right now. no divorce or nothing we couldnt be happier. but ill just say that the other half of my heart is going away for a lil while to start her career off right. but no divorce ha ha. were stayin married but its just time she start her life career as im doing mine.. nothin major

 

Oh, I can understand that. Its cool that you can both agree to do that. Its hard, trust me I know from previous relationships.

Let me know if you find brighter bulbs!

 

well i've been looking and nothing yet but i did find sweet ass trun signal bulbs for my halos... there siverstar ultra's or something but their amber.... and the look sweet in the headlights....

 

Silverstars

 

not for headlight just turnsignals and running lamps...
silverstar headlights FTL, but silverstar turn signals FTW

 

soo can anyone kindly point me in the direction for a tune for my setup?? i NEEED a TUUUNNEEE!!! ha ha.

 

Assuming you would be doing the build at your house, you need to look up in the phone book for some tune shops around the place. If it is in a close distance you should be able to drive the car (like a grandma of course) and then have them tune it once the build is done. I may be wrong but the parts will probably have to be on the car before they can tune properly. Or if you want DTP is said to be good at tunning, so we can do it over here, I have a garage we can use, and then you can have it towed there if you like.


Like Eddie said, the build could probably be done in one weekend with more than just me. I know I said a couple weeks, but Im sure me you and Eddie can have it done in one weekend.

 

ha ha im still waiting to C if my loan went through or not...

 

Hey, guys.... Talked to SRod007 a few times today.

For the install.... All the (good!!) help that comes his way is GOOD, but, remember that univited helper, named Murphy, will be there to screw it all up. Having been there, done that, too many times, there will be likely some unexpected issue to mess the whole thing up. That you can count on!! Make sure that all the issues are accounted for.

As for the tune.... I've got that covered. I know I've kept a low profile here, but I believe I have a better handle on LE5 tuning more than many others out there, including going to boost.

Hopefully, as Steve has hoped for, a bunch can get together next weekend to get it put together and, if all goes well we can get his car tuned and running!!

 

well lets do the damn thing!!! woooooo hooooooo

 

Trifecta Performance will be tuning my car Via the GT tuner and the internet in conjuction with DTP after the turbo install is complete

bye bye AEM f/ic

 

i feel ya bro...whn i left for the army i had to leave my fiance back home inlouisiana so she can finish her college courses....i've got one year down 4 more to go and i havent seen her in 6 months. all for the good tho. just gtta stay optimistic. and meet people who will keep your spirits up and convince you to break the speed limit racin down 64 towards hampton........no names lol. been awhile speakin of which any plans soon?

 

hey man, that's what we're here for! I still want to go to the track once I get back. I'll be back on the 10th now; maybe even sooner.

 

hey whuts up everyone!...has lee been on latley im tryin to get in touch with him

 

hey hey theres my favorite air ridin balt! long time no talk!!! justin make sure its on for this weekend. im ready when u guys are. and much thanks to Joe for the tuning assistance. also Joe if you could kindly find out from that mitch's place how much they would charge to weld that bung on for me id be greatly appreciative.

 

haha yea its been a while...i need to get down that way soon...im really tryin to get with lee cuz he said he had a stage 2 availible maybe...s/c is off the car so im tryin to get it he wont answer the damn phone!

 

havent seen lee in a while on here.

 

so steve you building this weekend? I'm down for helping out, it'll keep me from spending a ton of money that i don't need to spend... lol plus i get to do something cool

 

Getting ready to head out of town for a few days on a business trip. I'll try to check in here if possible.

Mitch's: 857-5738 --- 2801 Lafayette Blvd, Norfolk Think it cost me $20 to install the bung. It should go between the header/downpipe flange and the cat. Should be at or above level.

When you install your AEM wideband, make sure that the analog output wires (2) are near the console to be able to hook up to the HP Tuners Pro input to log. Just tape off the ends of the wires for now.

Another "gotcha" thought.... Make sure you've got the right harness for the injectors. You can check that beforehand just to make sure the ends are right on both ends.

Suggestion: Just shoot for the blower and related items install this weekend and make sure that's right. Depending on time left, then consider the clutch. The two are unrelated and the clutch can be done later.

One heads-up for ya, though.... HP Tuners does NOT have the capability of "tuning" the driver!!

 

alrighty sounds good. it all depends on justin though otherwise we will not have the garage facilities to do this work. ha ha. but thanks for the number. were u able to get a good base tune started

 

been saving up money guys im gonna start finishing my interor andi need someones help lol. i plan on putting neons/leds under the dash and in the middle right across from the cupholders in the backseat. my only issue is wiring and installing switches for them im good with wires but ive never done wires on a car and i dont wanna **** anything up.

btw i made myself a sig it was bigger but it didnt fit so i made it small and it looks shitty now lol. it says domestic disturbance across the bottom but it wont fit and i dont wanna make it smaller! X(