Wisconsin Thread (Team Rev & Others)
05-13-2010, 07:35 PM
#1001
Member
Join Date: 08-31-09
Location: Big Bend, WI
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
CED is coming up in June. Some of these guys meet up at Hwy occasionally but they aren't accepting new members in the gang. It's a very exclusive society. Have to work your way in with nude gf pics or somethin........
05-13-2010, 08:04 PM
#1003
Senior Member
Join Date: 06-28-06
Location: Rochester, mn
Posts: 6,651
Likes: 0
Received 0 Likes
on
0 Posts
you're not this mean when i'm behind ya 
everything is in! i just need to fill the h/e system and top off the radiator before i start it up to see if everything is sealed properly.
only a couple of minor things to do... i have to put in my boost gauge and figure out what to do with the mess of wires that i have made in my bay
if i get my tune sent to me, i'll be up and running (hopefully) by tomorrow night.
don't forget the grandfathered in mn guy right here
everything is in! i just need to fill the h/e system and top off the radiator before i start it up to see if everything is sealed properly.
only a couple of minor things to do... i have to put in my boost gauge and figure out what to do with the mess of wires that i have made in my bay
if i get my tune sent to me, i'll be up and running (hopefully) by tomorrow night.
Last edited by hoffa; 05-13-2010 at 08:04 PM. Reason: Automerged Doublepost
05-13-2010, 10:25 PM
#1005
Senior Member
Join Date: 06-28-06
Location: Rochester, mn
Posts: 6,651
Likes: 0
Received 0 Likes
on
0 Posts
05-14-2010, 01:40 AM
#1006
New Member
Join Date: 05-13-10
Location: wisconsin
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Funny you say that. 9mm doesn't have stopping power and if you get a 40 cal u can swap barrels and shoot a 357sig which happens to have the same stopping power as a 357mag. Considering the 357sig is just a necked down s&w 40. Bang stands for what I do to jordans mom. All night long.
05-14-2010, 09:59 AM
#1007
I am sorry but Old School was not as good as it was hyped up to be. I was pretty disappointed.
I keep hearing the term "Stopping Power" used when talking about these hand guns. I am looking for something a long the lines of home protection so I am not if stopping power is that important.
I am torn between the XD9mm and the XD357. Any additional input is greatly appreciated.
That's not right man... lol
I keep hearing the term "Stopping Power" used when talking about these hand guns. I am looking for something a long the lines of home protection so I am not if stopping power is that important.
I am torn between the XD9mm and the XD357. Any additional input is greatly appreciated.
That's not right man... lol
05-14-2010, 10:15 AM
#1008
Senior Member
Join Date: 06-28-06
Location: Rochester, mn
Posts: 6,651
Likes: 0
Received 0 Likes
on
0 Posts
05-14-2010, 01:05 PM
#1011
New Member
Join Date: 05-13-10
Location: wisconsin
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
I am sorry but Old School was not as good as it was hyped up to be. I was pretty disappointed.
I keep hearing the term "Stopping Power" used when talking about these hand guns. I am looking for something a long the lines of home protection so I am not if stopping power is that important.
I am torn between the XD9mm and the XD357. Any additional input is greatly appreciated.
That's not right man... lol
I keep hearing the term "Stopping Power" used when talking about these hand guns. I am looking for something a long the lines of home protection so I am not if stopping power is that important.
I am torn between the XD9mm and the XD357. Any additional input is greatly appreciated.
That's not right man... lol
05-14-2010, 05:23 PM
#1014
New Member
Join Date: 04-30-10
Location: west bend wi
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
05-14-2010, 07:02 PM
#1015
There where a couple of times that I lol'd. But overall I thought it sucked.
I have only shot one hand gun in my life and it was a 357 revolver.
What do you mean by "wicked hot"? I am looking for gun control for multiple rounds and accuracy.
Stopping power is pretty important imo. 9mm does have enough to drop a man in one shot even if its a well placed shot. Hence the reason why just about every police department had dropped the 9mm for the s&w 40. U want a wicked hot round get the 357 sig. U want the power and tons of choices in ammo get the 40s&w. When u come down to mke next ill let you throw a few rounds out of mine.
What do you mean by "wicked hot"? I am looking for gun control for multiple rounds and accuracy.
05-14-2010, 08:19 PM
#1017
Stopping power is pretty important imo. 9mm does have enough to drop a man in one shot even if its a well placed shot. Hence the reason why just about every police department had dropped the 9mm for the s&w 40. U want a wicked hot round get the 357 sig. U want the power and tons of choices in ammo get the 40s&w. When u come down to mke next ill let you throw a few rounds out of mine.
Handguns:
To be legal for deer, handguns must use center-fire cartridges of .22 caliber or
larger and have a 5˝ inch minimum barrel, measured from the firing pin to the
muzzle with the action closed.
So the XD40 with 5" barrel would be too short?
http://www.xdpistols.com/category/8-...W_Pistols.aspx
05-15-2010, 12:37 AM
#1018
New Member
Join Date: 05-13-10
Location: wisconsin
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
What about WI deer hunting laws?
Handguns:
To be legal for deer, handguns must use center-fire cartridges of .22 caliber or
larger and have a 5˝ inch minimum barrel, measured from the firing pin to the
muzzle with the action closed.
So the XD40 with 5" barrel would be too short?
http://www.xdpistols.com/category/8-...W_Pistols.aspx
Handguns:
To be legal for deer, handguns must use center-fire cartridges of .22 caliber or
larger and have a 5˝ inch minimum barrel, measured from the firing pin to the
muzzle with the action closed.
So the XD40 with 5" barrel would be too short?
http://www.xdpistols.com/category/8-...W_Pistols.aspx
Intresting link regarding the 357sig vs 45 acp
http://intrencik.com/357sig.htm
But if you are going to use it for hunting or defense ur better off getting a 357mag revolver. If that's the case look at the ruger gp100. http://pictures.auctionarms.com/6306183507/acfb7f.jpg
Ill be ready then! Lol. Not to down play the 9mm it has its high points. Its a great round for women to shoot cause the recoil is slim to nill. There is a ton of ammo choices out there counsidering its a nato round. But it lacks the bullet grainweight and muzzle speed needed to drop a man in one shot to the center mass. I really was debating on getting a 9mm xd but with 40s&w ammo being just as cheap and ammo choices being just as plentiful, plus it being a larger round. It pretty much made up my mind. 180 grain hollow points bark matches the bite.
Last edited by XD40_Bang!; 05-15-2010 at 12:37 AM. Reason: Automerged Doublepost
05-15-2010, 01:18 PM
#1020
No you can't hunt with it unless you purchased an aftermarket barrel. They do make them. The cost is pretty fair. The 357sig is a hot round because its basically a 357mag being shot from a polymer.
Intresting link regarding the 357sig vs 45 acp
http://intrencik.com/357sig.htm
But if you are going to use it for hunting or defense ur better off getting a 357mag revolver. If that's the case look at the ruger gp100. http://pictures.auctionarms.com/6306183507/acfb7f.jpg
Intresting link regarding the 357sig vs 45 acp
http://intrencik.com/357sig.htm
But if you are going to use it for hunting or defense ur better off getting a 357mag revolver. If that's the case look at the ruger gp100. http://pictures.auctionarms.com/6306183507/acfb7f.jpg
How much do they cost?
I am not really into revolvers. They have proven the test of time but if Zombies attack my house I would not want to have to reload every 6 rounds.
I could justify spending a little more money on a gun if I were going to use it for Home Protection and deer hunting.
05-15-2010, 01:52 PM
#1021
New Member
Join Date: 05-13-10
Location: wisconsin
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
05-15-2010, 04:19 PM
#1023
Member
Join Date: 01-02-05
Location: Appleton, WI
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
hey ebristol do you still do tunning? I had my car dyno'd today at beyond redline and for some reason the hp starts to fall after 6300 rpm and the a/f ratio flatlines.
05-16-2010, 07:03 AM
#1025
how bout the hood.. would that safice lol
that might of been ryan? not sure 100% thou, not certain if he has black wheels or not.
explain flatlines, it might help eric with your question?
nice chris, did you get my last pm into regaurds to your questions?
that might of been ryan? not sure 100% thou, not certain if he has black wheels or not.
nice chris, did you get my last pm into regaurds to your questions?
Last edited by OneCOLDBIZL272; 05-16-2010 at 07:03 AM. Reason: Automerged Doublepost