Parts Buy and sell your parts
Mark this thread as Unsold

For Sale Coilover Springs - 2.5" ID - Eibach & Hypercoils

Thread Tools
 
Search this Thread
 
Old Jun 2, 2011 | 08:17 PM
  #1  
scottherbert's Avatar
Thread Starter
Member
 
Joined: 08-22-08
Posts: 369
Likes: 0
From: Colorado
Coilover Springs - 2.5" ID - Eibach & Hypercoils

For Sale: 2.5" ID Eibach and Hypercoil Springs. Some of these have never been used, most have been used once or twice. I tested a number of spring rates with my Cobalt. Many, if not most, coilovers or coilover kits use 2.5" ID springs. If you really want to change your spring rates, this is the way...

New: Eibachs cost $60.20 each = $120.40 per pair, Hypercoils cost $55.00 each = $110.00 per pair -- plus shipping to wherever you live (I'll provide shipping costs before you make a decision).

I'm selling pairs only.

Eibachs:
2ea 6" x 450 lbs @$80 for the pair
2ea 6" x 550 lbs @$80 for the pair

2ea 7" x 500 lbs @$80 for the pair
2ea 7" x 550 lbs @$80 for the pair

Hypercoils:
2ea 7" x 400 lbs @$70 for the pair
2ea 7" x 450 lbs @$70 for the pair

You can PM me if you're interested. I'll handle money exchanges via PayPal.

Scott Herbert
Old Jun 2, 2011 | 08:50 PM
  #2  
BooSSted's Avatar
Senior Member
iTrader: (3)
 
Joined: 11-07-05
Posts: 3,247
Likes: 0
From: Bantario
I'm using stance coil overs and would like stiffer springs for the rear. Will any of these work?
Old Jun 3, 2011 | 02:56 PM
  #3  
scottherbert's Avatar
Thread Starter
Member
 
Joined: 08-22-08
Posts: 369
Likes: 0
From: Colorado
Originally Posted by BooSSted
I'm using stance coil overs and would like stiffer springs for the rear. Will any of these work?
I'm pretty sure they'll all work. I don't know exactly how long the standard Stance springs are -- probably 7" or 8". I have Ground Control coilover kits -- they came with a 6" spring up front and 8" springs in the rear. I've been using 7" or 6" springs up front for a long time. I simply adjust the height to where I want it.

Here's what the Eibach springs look like for front and rear:



Here's the car on 6" fronts and 7" rears adjusted all the way down to the bottom:



and:



So I think either length would work. Your biggest challenge is figuring out how stiff you want. The photos above are on 650 lb rear springs and 700 lb front springs -- 10" wide rims and 255/35 x 18 Hoosier A6 slicks.

Scott
Old Jun 18, 2011 | 08:16 PM
  #4  
snaponbob's Avatar
New Member
 
Joined: 05-29-10
Posts: 10
Likes: 0
From: KC, Mo
Are they still available?
Old Jun 25, 2011 | 11:14 AM
  #5  
scottherbert's Avatar
Thread Starter
Member
 
Joined: 08-22-08
Posts: 369
Likes: 0
From: Colorado
Updated Coilover Springs 2.5" ID & Eibach ProKit Springs

Two pairs of Coilover Springs are sold - the rest in various sizes are still available (see below)!

IN ADDITION: I have two sets of Eibach ProKit Springs for Sale
1ea Set for an 05-10 Cobalt (front and rear springs) -- $185 plus shipping
1ea Set for an 03-08 Saturn Ion (front and rear springs) -- $185 plus shipping

These sell for $250-260 - according to Eibach they deliver the following drops:
Eibach Pro-Kit lowers the 2005-2010 Cobalt 1.6" Front, 1.8" Rear
Eibach Pro-Kit lowers the 2005-2010 Cobalt SS 0" Front, .5" Rear

The drops are about the same for an Ion/Redine. These are progressive springs, nice ride but stiffer when you need it.

Originally Posted by scottherbert
For Sale: 2.5" ID Eibach and Hypercoil Springs. Some of these have never been used, most have been used once or twice. I tested a number of spring rates with my Cobalt. Many, if not most, coilovers or coilover kits use 2.5" ID springs. If you really want to change your spring rates, this is the way...

New: Eibachs cost $60.20 each = $120.40 per pair, Hypercoils cost $55.00 each = $110.00 per pair -- plus shipping to wherever you live (I'll provide shipping costs before you make a decision).

I'm selling pairs only.

Eibachs:
2ea 6" x 450 lbs @$80 for the pair
2ea 6" x 550 lbs @$80 for the pair

2ea 7" x 500 lbs @$80 for the pair -- SOLD
2ea 7" x 550 lbs @$80 for the pair -- SOLD


Hypercoils:
2ea 7" x 400 lbs @$70 for the pair
2ea 7" x 450 lbs @$70 for the pair

You can PM me if you're interested or email me at scottherbert@comcast.net. I'll handle money exchanges via PayPal.

Scott Herbert
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
taintedred07
2.0L LNF Performance Tech
32
May 28, 2022 03:47 AM
KMO43
Front Page News
33
Jan 12, 2016 12:01 AM
Tupp
Suspension
5
Sep 30, 2015 08:18 PM
KMO43
Featured Car Showcase
37
Sep 27, 2015 08:53 PM
GBRunner24
Featured Car Showcase
3
Sep 26, 2015 06:44 PM




All times are GMT -4. The time now is 07:59 PM.