Mark this thread as Unsold
FS: 5000k HID (low kit) 9007
yes and no..
everything you need to run it comes with the kit...
you JUST DONT hook up the bulbs and turn it on..
you use the supplied power and supplied ground and hook those up, and it works
everything you need to run it comes with the kit...
you JUST DONT hook up the bulbs and turn it on..
you use the supplied power and supplied ground and hook those up, and it works
there is a nice spot right under the headlight... the ballast fits there PERFECTLY...
It is a thin piece of metal that you just have to drill into... to mount the ballast (stud and nut) to, so it doesnt move around.
It is a thin piece of metal that you just have to drill into... to mount the ballast (stud and nut) to, so it doesnt move around.
so there are spots for screw on the ballasts or are there plastic mounts I screw down? what brand are they?
ill take a pic of the assembly.. how the screw hooks up to the holder.. brb


here is everything in the box
4 bulbs total as you can see.
2 ballasts
1 complete wiring harness
2 brackets to mount to the car
2 screws to tighten the brackets
2 bolts that will go through your FRAME
2 nuts that hook to the bolts.
everything is here that you need!!


here is everything in the box

4 bulbs total as you can see.
2 ballasts
1 complete wiring harness
2 brackets to mount to the car
2 screws to tighten the brackets
2 bolts that will go through your FRAME
2 nuts that hook to the bolts.
everything is here that you need!!
Last edited by syP; Jul 4, 2007 at 07:12 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Jesse
Problems/Service/Maintenance
2
Sep 28, 2015 12:51 PM



