Mark this thread as Unsold
FS: Car Items
#1
FS: Car Items
I now have a secure paypal account. Will be accepting payments that way to mikeexelby@hotmail.com for paypal. No more money orders. All items are the price suggested with shipping included. Please PM Me or e-mail me at mikeexelby@hotmail.com for any details or questions.
I sold the airbox but I am still awaiting payment from the user. Hope to hear from him today.
The items I still have up for bid as follows:
Stock Muffler from Cobalt SS/SC: $40
Only has 6,000 miles on it, still looks brand new. Good replacement for those who put muffler swaps on only to realize it's too fricking loud.
Valentine 1 Radar Detector: $170 Now
Comes with Lighter adapter, Consealed display, basic wiring (using telephone cable) & actual V1 unit. Unit is 2-3 years old in flawless condition.
Here is the report you pull up when you check the serial #
Here is the V1 serial # 5960210494
Status Report on Your Valentine One
Serial Number 5960210494
V1 Description: Radar circuitry known in-house as V1.7 gives high performance on all radar bands. Also,it remembers your “mode” setting when shut off. Has stack of four LEDs on front panel for band identification. Front and rear laser.
Upgrade Recommendation: While this version is not quite up to today’s V1 standard for Ka, it’s almost always good enough, and always better than detectors from other makers. X and K performance is excellent. Upgrading merely to improve radar performance is not cost effective, in my opinion, unless you’re concerned about the POP Mode operating in your area. Upgrading does bring other benefits, including our latest laser warning (front and rear), which outperforms the competitors by a wide margin, and POP Protection. Also, you'll get the new Euro Mode.
2.8 SFPH pulley (Easily removeable): $70
This pulley comes complete with instructions, 4 bolts, the HUB and the 2.8 Pulley. Black pulley that looks outstanding and has never been used.
600watt 2 channel Rockford Fosgate AMP: $60
Unit has never been used. Comes in as is condition. I have only the AMP, no wiring provisions or nothing.
12' Jensen Subwoofer 600watt: $70
Unit has never been used. As is condition. It's silver with blue and black lettering.
I sold the airbox but I am still awaiting payment from the user. Hope to hear from him today.
The items I still have up for bid as follows:
Stock Muffler from Cobalt SS/SC: $40
Only has 6,000 miles on it, still looks brand new. Good replacement for those who put muffler swaps on only to realize it's too fricking loud.
Valentine 1 Radar Detector: $170 Now
Comes with Lighter adapter, Consealed display, basic wiring (using telephone cable) & actual V1 unit. Unit is 2-3 years old in flawless condition.
Here is the report you pull up when you check the serial #
Here is the V1 serial # 5960210494
Status Report on Your Valentine One
Serial Number 5960210494
V1 Description: Radar circuitry known in-house as V1.7 gives high performance on all radar bands. Also,it remembers your “mode” setting when shut off. Has stack of four LEDs on front panel for band identification. Front and rear laser.
Upgrade Recommendation: While this version is not quite up to today’s V1 standard for Ka, it’s almost always good enough, and always better than detectors from other makers. X and K performance is excellent. Upgrading merely to improve radar performance is not cost effective, in my opinion, unless you’re concerned about the POP Mode operating in your area. Upgrading does bring other benefits, including our latest laser warning (front and rear), which outperforms the competitors by a wide margin, and POP Protection. Also, you'll get the new Euro Mode.
2.8 SFPH pulley (Easily removeable): $70
This pulley comes complete with instructions, 4 bolts, the HUB and the 2.8 Pulley. Black pulley that looks outstanding and has never been used.
600watt 2 channel Rockford Fosgate AMP: $60
Unit has never been used. Comes in as is condition. I have only the AMP, no wiring provisions or nothing.
12' Jensen Subwoofer 600watt: $70
Unit has never been used. As is condition. It's silver with blue and black lettering.
Last edited by 3fo893013L; 03-03-2006 at 02:17 PM.
#4
Originally Posted by Darksun280
the pulley with hub is the hub the qucik change one or it just makes it so if you want to pull the pulley off i wont bend it.
This unit. I meant to say interchangeable unit. Retails $150.
#5
Senior Member
Join Date: 06-04-05
Location: LongIsland
Posts: 2,040
Likes: 0
Received 0 Likes
on
0 Posts
Damit too many good deals right now. Well like i told another seller I'll keep n eye out and see if it hasn't sold by next friday. Any spare cash i have right now i have to use to buy new glasses. Unfortunatly seeing is more inportant than a pully.
#6
Originally Posted by Darksun280
Damit too many good deals right now. Well like i told another seller I'll keep n eye out and see if it hasn't sold by next friday. Any spare cash i have right now i have to use to buy new glasses. Unfortunatly seeing is more inportant than a pully.
#9
Originally Posted by Mike Richmond
What model is the amp?
#10
Originally Posted by Mike Richmond
What model is the amp?
sorry guys haven't been on as of late. I am unsure how to check but The numbers on the back read
5673247100-01
with e11 in a square box and 020541 next to it. It has a left and right channel input, left and right bridged B+ and ground black squares where you can screw wiring into. The AMP is a 600 watt amp as stated in the front and it's gunmetal apperance/look. I will try to snap pictures for more clarification. I will ship out of state by the way for free.
#13
Originally Posted by trent_ky
I Want The Radar Detector!! Mine Just Bit The Dust!!!
All other items besides the Valentine One are still up for grabs.
New sweet deal of the day
2.8' SFPH Pulley with o connector and 4 bolts (complete set) $50 which includes free overnight shipping!
Still have original packing materials and instructions. Never been used!!
#14
Senior Member
Join Date: 08-02-05
Location: London
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Dilema ... I want the pully but dont want to run it on the stock injectors (were you running the 2.8 on stock tune?) ...also are you selling the tensioner or new belt with it ?
#15
Originally Posted by c7015
Dilema ... I want the pully but dont want to run it on the stock injectors (were you running the 2.8 on stock tune?) ...also are you selling the tensioner or new belt with it ?
The pulley was never on my car.
#16
Senior Member
Join Date: 08-02-05
Location: London
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sneaky
I am only selling the pulley, I do not have a tensioner or a belt. You can get those parts off Intense's website. I never used the pulley. In fact I am waiting for GM Stage 2. The pulley I got as a gift and don't want to risk using something so small and having something bad happen. I have realistic goals but they don't include screwing my car up.
The pulley was never on my car.
The pulley was never on my car.
Thanks For clearing that up ... my plan was going to be stg one and 2.8 so this works out great ..however stg one is on hold because of the Austrailia Trip ...I will think on it some more
#17
Originally Posted by c7015
Thanks For clearing that up ... my plan was going to be stg one and 2.8 so this works out great ..however stg one is on hold because of the Austrailia Trip ...I will think on it some more
#18
Originally Posted by sneaky
sorry guys haven't been on as of late. I am unsure how to check but The numbers on the back read
5673247100-01
with e11 in a square box and 020541 next to it. It has a left and right channel input, left and right bridged B+ and ground black squares where you can screw wiring into. The AMP is a 600 watt amp as stated in the front and it's gunmetal apperance/look. I will try to snap pictures for more clarification. I will ship out of state by the way for free.
5673247100-01
with e11 in a square box and 020541 next to it. It has a left and right channel input, left and right bridged B+ and ground black squares where you can screw wiring into. The AMP is a 600 watt amp as stated in the front and it's gunmetal apperance/look. I will try to snap pictures for more clarification. I will ship out of state by the way for free.
#19
Senior Member
Join Date: 08-02-05
Location: London
Posts: 1,668
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sneaky
ok, the pulley will still be here I am sure If you want to work some type of payment plan let me know. PM if you have other questions
Sneaky I'll Take it I sent you a PM
#20
Senior Member
Join Date: 02-22-05
Location: Michigan, Clinton Twp
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
sneaky i also live in Clinton Township and would love to meat up with you and take at leats the pulley off of you.
i am also pming you. my aim s/n is Shermen09 ill im you if i c you on. let me know you would not need to ship or anthing. so hit me up (if you still have the pulley)
i am also pming you. my aim s/n is Shermen09 ill im you if i c you on. let me know you would not need to ship or anthing. so hit me up (if you still have the pulley)
#22
Originally Posted by Shermen
sneaky i also live in Clinton Township and would love to meat up with you and take at leats the pulley off of you.
i am also pming you. my aim s/n is Shermen09 ill im you if i c you on. let me know you would not need to ship or anthing. so hit me up (if you still have the pulley)
i am also pming you. my aim s/n is Shermen09 ill im you if i c you on. let me know you would not need to ship or anthing. so hit me up (if you still have the pulley)
#23
Originally Posted by Mike Richmond
I'm pretty sure that is the serial number. If your amp is anything like the RF amps I have, you'll either find the model number dead center on top of the amp (just to the right of the RF logo, probably 201S), or it is on one of the end caps (like my 501BD).
Thread
Thread Starter
Forum
Replies
Last Post
royce777
Parts
27
09-28-2015 07:11 AM
jcalvin1126
2.0L LNF Performance Tech
3
09-11-2015 10:24 AM
XStylus
Redline Goods
17
09-03-2015 10:30 AM