Mark this thread as Unsold
JapEatr's end of season GARAGE sale!!!!
10-26-2008, 11:18 AM
#1
JapEatr's end of season GARAGE sale!!!!
Hey guys as the temps cool down and holidays approach i am in need of some fundage, so i cleaned out the garage of all my parts that i can move and here they are:
(2) ZZP 3" 3bolt header/downpipe gaskets-fit shorty headers and stock manifold with 3" DP- 10 shipped each or 20 shipped for both
LH tailight coupe - missing 1 stud ( available at hardward store)- 35 shipped OBO
DRIVER gen 1 Black Projector headlight (LH)- had to replace my set after a crach this ONE survived. has dust on inside of lens that will need to be cleaned out with water and compressed air- 50 shipped OBO SOLD
MAGNAFLOW CUSTOM CATBACK EXHAUST 2.5"- has a magnaflow muffler 5"x8"x14" with 2.5" piping all the way to the stock resonator(although used a magnaflow round muffler as a resonator on my car) includes stock LSJ tip painted flat black, hangers arleady welded on - sounded great on my car, wasnt too loud and had no buzz after i put the resonator inline - [B]SOLD!!![B]
zzp midlength downpipe-3" 2 bolt inlet/weld in 2.5" outlet- Has magnaflow high flow cat on it, not sure they are the best tho HAS BUNG INSTALLED FOR WIDEBAND, WIll only fit the ZZP MIDLENGTH HEADER
some welds will need to be redone at the outlet during install as they cut it wrong when taking it off and halfass welded it back together(PM for PIC). GET THIS OUT OF MY GARAGE or im scraping it for the converter metals
SOLD!!!
STOCK LSJ MOTOR MOUNT- 2005 model 20K on it 25 shipped
STOCK TRANNY MOUNT INSERTS- 10 shipped good for returning car to stock so you can sell your poly trans mounts
STOCK BLOWER PULLEY- I have 2 of these 10 bux shipped a piece
GMPP stage 2 pulley ring - 30 shipped
I have some other things lying around so feel free to ask if you dont see anything.
PM for any questions. I accept paypal. Local pick up will save you BIG money on the exhaust stuff. let me know.
Thanks for looking!
(2) ZZP 3" 3bolt header/downpipe gaskets-fit shorty headers and stock manifold with 3" DP- 10 shipped each or 20 shipped for both
LH tailight coupe - missing 1 stud ( available at hardward store)- 35 shipped OBO
DRIVER gen 1 Black Projector headlight (LH)- had to replace my set after a crach this ONE survived. has dust on inside of lens that will need to be cleaned out with water and compressed air- 50 shipped OBO SOLD
MAGNAFLOW CUSTOM CATBACK EXHAUST 2.5"- has a magnaflow muffler 5"x8"x14" with 2.5" piping all the way to the stock resonator(although used a magnaflow round muffler as a resonator on my car) includes stock LSJ tip painted flat black, hangers arleady welded on - sounded great on my car, wasnt too loud and had no buzz after i put the resonator inline - [B]SOLD!!![B]
zzp midlength downpipe-3" 2 bolt inlet/weld in 2.5" outlet- Has magnaflow high flow cat on it, not sure they are the best tho HAS BUNG INSTALLED FOR WIDEBAND, WIll only fit the ZZP MIDLENGTH HEADER
some welds will need to be redone at the outlet during install as they cut it wrong when taking it off and halfass welded it back together(PM for PIC). GET THIS OUT OF MY GARAGE or im scraping it for the converter metals
SOLD!!!
STOCK LSJ MOTOR MOUNT- 2005 model 20K on it 25 shipped
STOCK TRANNY MOUNT INSERTS- 10 shipped good for returning car to stock so you can sell your poly trans mounts
STOCK BLOWER PULLEY- I have 2 of these 10 bux shipped a piece
GMPP stage 2 pulley ring - 30 shipped
I have some other things lying around so feel free to ask if you dont see anything.
PM for any questions. I accept paypal. Local pick up will save you BIG money on the exhaust stuff. let me know.
Thanks for looking!
Last edited by JapEatr; 10-29-2008 at 12:33 PM.
10-26-2008, 03:07 PM
#6
Make me offers on the exhaust,
I'll take a pic here shortly when I get home
Last edited by JapEatr; 10-26-2008 at 03:07 PM. Reason: Automerged Doublepost
10-26-2008, 03:47 PM
#12
Senior Member
iTrader: (1)
Join Date: 07-02-05
Location: West Carrollton (Dayton), OH
Posts: 8,725
Likes: 0
Received 2 Likes
on
2 Posts
I'm not after your exhaust components, just the gasket for the midlength header flange. If I can get it from you cheaper than ZZP, I'll take one (unless I misunderstood and you're using them currently)
10-26-2008, 08:53 PM
#13
let me know!
I recently went with 3" catless so i had a new system bent for it
PMs replyed
Projector housing sold
BUMP for exhaust
any questions, please hit me up
Last edited by JapEatr; 10-26-2008 at 08:53 PM. Reason: Automerged Doublepost
10-27-2008, 10:21 PM
#15
Update
shipping projector first thing in the AM
Lowered my asking price for just about all my parts. Please make me offers
exhaust and downpipe pending for other offers so let me know soon if interested
also sssc king let me know if you still want the stock mount
also going thru my attic as we speak so bump this thread if looking for something in particular
Lowered my asking price for just about all my parts. Please make me offers
exhaust and downpipe pending for other offers so let me know soon if interested
also sssc king let me know if you still want the stock mount
also going thru my attic as we speak so bump this thread if looking for something in particular
10-28-2008, 06:44 PM
#17
Sorry sold my spare block recently...i wish i had posted it here...
EXHAUST SOLD
PROJECTOR SOLD
shipped the projector and exhaust a few moments ago
bump for mount and downpipe, and tailight
im surprised no one needs these gaskets
EXHAUST SOLD
PROJECTOR SOLD
shipped the projector and exhaust a few moments ago
bump for mount and downpipe, and tailight
im surprised no one needs these gaskets
Last edited by JapEatr; 10-28-2008 at 06:44 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post