Mark this thread as Unsold
Wanted Lnf pcm
08-01-2011, 10:24 PM
#3
Senior Member
Thread Starter
Join Date: 07-12-08
Location: Houston, TX
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
What all is required to get this on working? does it need the crank relearn process or seed learn? I havnt had to replace one of these so im not sure what all is required to get it up and running.
08-01-2011, 11:14 PM
#5
you need gm to flash the file on the ecm since you cant do that. the ecm will have the serial on the ecm already but you will need to have the vin put onto the ecm. The flash will be around 89$.. I am prety sure this is what needs to happen. because the lnf ecm has perameters hptuners cant get to.
08-01-2011, 11:16 PM
#6
you need gm to flash the file on the ecm since you cant do that. the ecm will have the serial on the ecm already but you will need to have the vin put onto the ecm. The flash will be around 89$.. I am prety sure this is what needs to happen. because the lnf ecm has perameters hptuners cant get to.
08-02-2011, 01:56 AM
#7
Senior Member
Thread Starter
Join Date: 07-12-08
Location: Houston, TX
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
Yea its a ok price. I found another one for $150. Ive been doing my research for the past couple hours and read that trifecta can actually fix ECMs... Idk im going to email vince and see what he has to offer. It would be nice to have mine fixed so i dont have to credit my car yet again! lol When i first bought hptuners i had no clue what i was doing with the credits, I credited two tunes I had sent to me and credited my car lol. Il let you know asap though. Im emailing Vince right now.
08-02-2011, 01:35 PM
#9
Senior Member
Thread Starter
Join Date: 07-12-08
Location: Houston, TX
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
Part of my harness got cought between the tranny and motor when i was installing my clutch. It was a small section of about 8 wires. Controlled the rear o2, speed sensor, and ECT sensor. I was rushing when i put it back together so made a careless mistake. I guess after i started it and the wires grounded out it shorted something in the ECM. I tried my computer in another LNF and the problems i am seeing followed
Thread
Thread Starter
Forum
Replies
Last Post