Mark this thread as Unsold
WTB: k04 oil feed banjo bolt and exhaust gasket
#1
New Member
Thread Starter
Join Date: 09-30-13
Location: Ann Arbor
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
WTB: k04 oil feed banjo bolt and exhaust gasket
Going out on a limb here. Looking to buy:
- 1 K04 flanged gasket(inlet to turbo)
- 1 oil feed banjo bolt
- 1 boost solenoid connector & pigtail
Thestealer ships want a fortune for these pieces. Let me know if someone has any available.
- 1 K04 flanged gasket(inlet to turbo)
- 1 oil feed banjo bolt
- 1 boost solenoid connector & pigtail
Thestealer ships want a fortune for these pieces. Let me know if someone has any available.
Last edited by alexofnazareth; 06-06-2014 at 09:21 AM.
#8
Senior Member
iTrader: (2)
Budget or not the last thing you need is a stretched drain bolt or worn out gasket that doesn't seal. If you can't afford a simple bolt and gasket then why build ? I'm not trying to come off as an ass by all means so don't take it that way. But a lesson is a building is budget for 30% over what your initial budget is because there's no such thing as a build that is on budget
#9
New Member
Thread Starter
Join Date: 09-30-13
Location: Ann Arbor
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
because a 40 dollar bolt and 15 dollar gasket from a stealership only adds onto the 3000 dollars ive already spent. If I can get it cheaper, I will. If I need to drill out a standard bolt and make it into a banjo to -4AN fitting, I will. Lol
Thread
Thread Starter
Forum
Replies
Last Post
Jesse
Problems/Service/Maintenance
2
09-28-2015 12:51 PM