My HID Retrofit project
Just wait a couple months, someone will make GOOD projectors for our cars instead of the crappy E-Bay ones. Those will give you the same result as Merc's with a better looking headlight.
Originally Posted by BooSSted
Just wait a couple months, someone will make GOOD projectors for our cars instead of the crappy E-Bay ones. Those will give you the same result as Merc's with a better looking headlight.
Originally Posted by Mercury
Umm I will just say this now that there will never be projectors made for our cars that will come with Xenon projectors. There are no aftermarket projectors out there that have Xenon projectors let alone bi-xenon. And if they did make them you wouldn't be able to touch them for under $1,500.
Yes, with the projector its AIMed much more accurately. With the halogen housing it doesnt really aim at all. the pictures make it look worse then if you actually where looking at it in person, but this obviously lets you see from a camera's standpoint what the difference is.
Our halogen housings have adjusters, I have mine set really high so I need to change it like my bro's so it points to the ground rather then 1000 feet away LOL.
Our halogen housings have adjusters, I have mine set really high so I need to change it like my bro's so it points to the ground rather then 1000 feet away LOL.
Did you ever make a how-to on this Mercury?
And that is a pretty intesne job. I might have to give a go at this if I move to long island. I will have access to the fathers tools since he will be about 15 minutes away.
And that is a pretty intesne job. I might have to give a go at this if I move to long island. I will have access to the fathers tools since he will be about 15 minutes away.
Originally Posted by Grimlakin
Again beautiful lights... After market people. MAKE A REAL SET FOR THE COBALT'S PLEASE!!
I WILL BUY THEM...
As long as they are not over around 1k I think.
I WILL BUY THEM...
As long as they are not over around 1k I think.
Originally Posted by Mercury
Here is a wiring diagram I made for my wiring harness.
Where it says bridge, there will be a diode there.
Right this minute I am creating shrouds to cover the reflector.
ok im understanding the diagram, buuuuut...y only one 9007 connector for the whole system? Do you think it would be ok to integrate a second 9007 connector into the harness. one for both projectors. hmmm maybe i need to look through more threads on hidplanet to see if someone explains it.




?? lol

