you need to retightin the piece that is holdin the projecter

 

That's what I mean by I had to ghetto rig it, right now its just zip ties hahahaha because it was getting dark and couldn't get it to sit properly. But its not that big of a difference where it actually would sit. Especially with the passenger one already being all the way up.....

 

Well wait... do you be the whole housing? Or the actual projector?

I did notice the passenger one does wiggle just slightly... is that easy to fix?

 

the projecter should be setting in the back and held in by a washer and screw mine did the samething but i took the lens back off and fixed it that way and retightened it all and worked fine

 

some reason i tried to aim them and it was all the way up like urs and still low so i took it all back out and tightened the projector again and it was fine after that

 

sweet you got your retros! cant wait to start mine when i get your old headlights!!!

 

how is this for my cutoff? just did it tonight

 

So is this bolt on the projector that i have to tighten on the inside oroutside of the housing?

 

im assuming inside since you gotta take off the lense again.

and diabetickriple you cant see your cutoff cuz it isnt against something

 

Just tignten the nut on the back of the projector. Take off the bulb holder (3 screws on projector) and take a pair of pliers, and tighten it down.

and Kripple, we need to see a shot of it against a wall.