Problems/Service/Maintenance Do you have problems with your new 2.0, 2.2, or 2.4L? What kind of service did you have done?

Tranny problem maybe?

Old Mar 20, 2009 | 02:05 PM
  #1  
mkulrey13's Avatar
Thread Starter
Banned
iTrader: (39)
 
Joined: 08-30-05
Posts: 18,509
Likes: 5
From: New Hampshire
Tranny problem maybe?

OK, Ive had my turbo kit on for over a year, as well as my stage 2 spec clutch and fidenza flywheel and never once had a problem. Lately, ive noticed on cold starts engaging first i hear a sound. It sort of sounds like 2 pieces of metal sliding against each other as if they were dry? does not happen on 1-2-3-4-5-r shifts just N-1 or moving the car the first time. After a few mins if i come to a stop and start again the sound is gone. Would anyone know what this could be? I have not experience any shifting problems and it still drives/shifts the same as before.
Reply
Old Mar 20, 2009 | 02:43 PM
  #2  
phillips01's Avatar
New Member
 
Joined: 09-26-08
Posts: 183
Likes: 0
From: michigan
check your trans oil level and condition <dirty ect>/had a few that leaked low due to bad axel seal/ and caused weird noises.?
Reply
Old Mar 21, 2009 | 11:52 AM
  #3  
mkulrey13's Avatar
Thread Starter
Banned
iTrader: (39)
 
Joined: 08-30-05
Posts: 18,509
Likes: 5
From: New Hampshire
Originally Posted by phillips01
check your trans oil level and condition <dirty ect>/had a few that leaked low due to bad axel seal/ and caused weird noises.?
Ill plan on replacing it soon. Any other suggestions?
Reply
Old Mar 21, 2009 | 01:00 PM
  #4  
Tomtwtwtw's Avatar
Senior Member
 
Joined: 03-30-06
Posts: 5,489
Likes: 0
From: Chandler, AZ
Originally Posted by mkulrey13
Ill plan on replacing it soon. Any other suggestions?
Replace the fluid first...only other thing I could think of is a worn synchro? But if it goes away after you've been driving, it certainly sounds like a dirty / low fluid issue.
Reply
Old Mar 27, 2009 | 04:21 PM
  #5  
mkulrey13's Avatar
Thread Starter
Banned
iTrader: (39)
 
Joined: 08-30-05
Posts: 18,509
Likes: 5
From: New Hampshire
Well i replaced my fluid, the noise is still there. Its only on cold starts when i first get rolling. After that its gone and is fine on warm starts and going. Again is sounds like 2 metal plates against eachother.
Reply
Old Mar 27, 2009 | 04:35 PM
  #6  
Dainslaif's Avatar
Banned
 
Joined: 10-14-07
Posts: 1,546
Likes: 0
From: Austin, TX
Brake rotors/pads. If it goes away once warmed up I wouldn't be too worried.
Reply
Old Mar 30, 2009 | 02:00 PM
  #7  
mkulrey13's Avatar
Thread Starter
Banned
iTrader: (39)
 
Joined: 08-30-05
Posts: 18,509
Likes: 5
From: New Hampshire
Originally Posted by Dainslaif
Brake rotors/pads. If it goes away once warmed up I wouldn't be too worried.
Its when im shifting...in the middle of letting my clutch out.
Reply
Old Mar 30, 2009 | 02:04 PM
  #8  
joeworkstoohard's Avatar
Senior Member
 
Joined: 05-21-06
Posts: 5,577
Likes: 3
From: Gainesville, FL
mine started doing the same thing. 3 weeks later, i heard a bang and started dripping brake fluid from the inspection hole. right now, the cars on stands, half taken apart, i haven't gotten far enough yet to see what it is
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OrangeCoba
Suspension
1
Oct 1, 2015 10:00 PM
MrInsanityWolf
New Members Check In!!
3
Sep 29, 2015 04:54 PM
Iceberg
New Members Check In!!
8
Sep 29, 2015 12:33 PM
Iceberg
Drivetrain
1
Sep 28, 2015 01:31 PM
Adiaz1ss
Problems/Service/Maintenance
4
Sep 26, 2015 11:51 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:00 PM.