Switchback LEDs!!!
here's a linkhttp://www.v-leds.com/BlinkerWarning...83296-1-3.html
My advise though, is to go somewhere like home depot and get your own wire connectors, because the ones that come with it are horrible. You can get the same style, the ones that come with it just didn't connect very well, and had some weird grease on them for some reason
Well, I had one burn out, then I decided to disable them altogether, I think it looks much better now.
Senior Member
Joined: 02-16-07
Posts: 517
Likes: 1
From: NJ
I just with 3b had the resistors... or plug and play.
Banned
Joined: 06-10-09
Posts: 148
Likes: 0
From: Davenport
And for anybody worried about the resistors, they are probably the easiet thing in the world to wire. If you can use a pair of pliers, you can install the resistors. It's simply put the wire from one side of the resistor next to the blue wire for the turn signal next to each other, clamp the wire tap down, and repeat for the ground and wire from the other side of the resistor. Takes about 10 sec.
I'm wanting these for the back. Then we could have taillights that changed color when you are blinking vs braking and also you could set up your reverse lights to light up white when you're in reverse and maybe red when stopping too (or yellow if you want to make them blinkers).
Senior Member
Joined: 02-16-07
Posts: 517
Likes: 1
From: NJ
Just got a set, and I could not be happier with these. They are awesome and very easy to install.
http://video.cardomain.com/VideoPlayer.aspx?id=706564 Just a short video for now. Hope it helps some people know how awesome these are... buy them now!!!
http://video.cardomain.com/VideoPlayer.aspx?id=706564 Just a short video for now. Hope it helps some people know how awesome these are... buy them now!!!
Banned
Joined: 07-22-10
Posts: 183
Likes: 1
From: Outer rings, Zegema Beach
its bad enough going to dunkin at 3am and trying to get out of a parking lot full of cops with blue reverse lots best mod ever though!
Thread
Thread Starter
Forum
Replies
Last Post
