was going to make some heavey duty sway bar links using himes joints and a piece of pipe so they wont go bad as fast and was thinking that they would be adjustable but would there be any advantage to adjusting them so as they are shorter just wondering

 

http://www.powergridinc.com/ It's my unerstanding that by shortening the length of the endlinks it makes the bar act asthough it is more stiff which for our application wouldnt be beneficial

 

+1 i'm with stiner. why make your own when powergridinc makes the best on the market for only 160?

 

ottp sells them, ls1fbody installed them and made a thread about them as well.

 

http://www.ottperformance.com/store/...inks-40p92.htm

We have them in stock

 

booya grandma and your 3 hot friends
https://www.cobaltss.net/forums/how-guide-43/how-install-powergrid-inc-adjustable-swaybar-endlinks-ottp-202550/

 

bcuse i can make them my self for about 20 bucks thats y im not buying them from any body and all the brands i have seen still use the cheap looking tie rod ends where i will be triyng to use greasebel hims joints

 

read ls1fbody's link he mentions a quick reason.