Does anyone know how to eliminate or at least reduce the violent wheel hop I sometimes get on a hard takeoff? any help would be great.

 

Solid tranny and motor mounts, or engals tq stiffener, or traction bars

 

pretty much exactly what the guy before me said

 

All those can be found at Turbo Tech Racing

 

let up on the right foot. seriously, these cars suck to launch if you have any kind of power, and it only gets worse the more power you add. for me, i can't go more than 1/2 throttle in first, and have to let off the gas at the top of 2nd. pretty lame.

but seriously, as SOON as you feel some wheel hop you need to let off the gas so you don't brake something.

 

sounds to me like your tryin to launch to hard too.. all that other stuff will help out though..

 

drag the clutch, have the mounts posted above, and dont launch so hard....

 

apparently Ingalls Torque Damper is great. you can adjust is soo for daily driving its dialed out and not still but for racing you can tighten it for optimal performance, but you get all the vibrations. ive also heard motor and tranny mounts are a solid choise as well.

 

Check out www.TurboTechRacing.com

We carry a solid engine mount that will help you out.