SNEAK PEAK: Time Attack rear antiroll bar!
New Member
Joined: 08-16-08
Posts: 63
Likes: 0
From: Stittville, New York
August 16 5 pm glen motor inn track days 17 18. My brake ducts use 3.25 red silicone hose and a plastic intermediate duct and a duct backing plate in 60 61, with floating rotors 28 mm x 315 (stock are 26mm x 315. The rotor vents are awesome...(OTTP can get them for you 
) shameless plug
) shameless plugHave the Coleman floating rotors 26mm
I kind of have a plan on the duct work but the plastic intermediate pipe is a good tip.
How do you mount the backing plate ??????
We just may have to show up to check out the cooling duct work
Will have to find out what OTTP has in stock
Senior Member
Joined: 02-03-08
Posts: 3,454
Likes: 1
From: Port Perry Ontario
I think that school was full when he tried to sign up for it.
Have the Coleman floating rotors 26mm
I kind of have a plan on the duct work but the plastic intermediate pipe is a good tip.
How do you mount the backing plate ??????
We just may have to show up to check out the cooling duct work
Will have to find out what OTTP has in stock
Have the Coleman floating rotors 26mm
I kind of have a plan on the duct work but the plastic intermediate pipe is a good tip.
How do you mount the backing plate ??????
We just may have to show up to check out the cooling duct work
Will have to find out what OTTP has in stock
Coleman told me they didnt have a 26 mm rotor blank they would machine it I opted for thicker standard part. The hats are not cheap to make and the hardware is expensive but I dont use single bolts/bobbins like Brembo. I will ask Larry there if he is sharing my template? lol Cooliung fans work for NASCAR but for road racing not practical and first visit to the gravel trap or such and the fans get killed ( we tried them) they actually restrict speed air flow on the road race track. Short paperclipped concrete walled ovals are a different environment and fans are neededthose track days filled fast I have more folks who want to go there that could not as it was full I could trade you a half day if you wanted; trackmasters at the Glen is right after Carlysle Lou Gigliotti is taking his ALMS GT2 Corvette there to show off...
New Member
Joined: 08-16-08
Posts: 63
Likes: 0
From: Stittville, New York
ya want me to tell you/show you how to build your own after two months of dicking around finding solutions?
Coleman told me they didnt have a 26 mm rotor blank they would machine it I opted for thicker standard part. The hats are not cheap to make and the hardware is expensive but I dont use single bolts/bobbins like Brembo. I will ask Larry there if he is sharing my template? lol Cooliung fans work for NASCAR but for road racing not practical and first visit to the gravel trap or such and the fans get killed ( we tried them) they actually restrict speed air flow on the road race track. Short paperclipped concrete walled ovals are a different environment and fans are neededthose track days filled fast I have more folks who want to go there that could not as it was full I could trade you a half day if you wanted; trackmasters at the Glen is right after Carlysle Lou Gigliotti is taking his ALMS GT2 Corvette there to show off...
Show me, I figure we would bring the car down and you would put the cooling ducts on in the dirt parking lot, in the rain
We sent Coleman a stock rotor as a sample.
Kent talked to the Lary with one R and was told they have no standard part, they make what you want from a sample. Seems like the GM hub should be a standard item that they could set up a run and make a pile of the to have on hand.
Did your thicker rotors work without changing anything ????????????
Kent called/looked on line right after he talked to you about the school and it was full, you must have got the last spot.
You will have to talk to him about trading track days
Have fun at the track
Senior Member
Joined: 02-03-08
Posts: 3,454
Likes: 1
From: Port Perry Ontario
Show me, I figure we would bring the car down and you would put the cooling ducts on in the dirt parking lot, in the rain
We sent Coleman a stock rotor as a sample.
Kent talked to the Lary with one R and was told they have no standard part, they make what you want from a sample. Seems like the GM hub should be a standard item that they could set up a run and make a pile of the to have on hand.
Did your thicker rotors work without changing anything ????????????
Kent called/looked on line right after he talked to you about the school and it was full, you must have got the last spot.
You will have to talk to him about trading track days
Have fun at the track
We sent Coleman a stock rotor as a sample.
Kent talked to the Lary with one R and was told they have no standard part, they make what you want from a sample. Seems like the GM hub should be a standard item that they could set up a run and make a pile of the to have on hand.
Did your thicker rotors work without changing anything ????????????
Kent called/looked on line right after he talked to you about the school and it was full, you must have got the last spot.
You will have to talk to him about trading track days
Have fun at the track
yes they fit we can do it in the rain
secrets....lol
wanna trade gotta talk lawlz
New Member
Joined: 08-16-08
Posts: 63
Likes: 0
From: Stittville, New York
New Member
Joined: 08-04-09
Posts: 125
Likes: 0
From: Alaska! AK49th
Where do I go to buy this bar? and what is the difference in 1.0 and 1.25, how will my ride be affected? Thank you!
Where would I go to purchase this fine product? oh and what's the difference between 1.0 and 1.25 in terms of ride. Thank you!
Where would I go to purchase this fine product? oh and what's the difference between 1.0 and 1.25 in terms of ride. Thank you!
Last edited by SmackinJuice; Aug 14, 2009 at 07:35 PM. Reason: Automerged Doublepost
Thread Starter
Senior Member
iTrader: (1)
Joined: 05-25-05
Posts: 7,661
Likes: 7
From: Southern New Jersey
revived! OK so trying to decide between the 1" and 1.25" would love the big bar for autocross but a little concerned for track days. How much throttle input is required to keep the backend behind you? If I lift to half throttle will it step out on me? And how quickly does it step out?: I've still got stock suspension otherwise on 245/35-18 Kumho XS.
Oh and is it still available in black or red?
Oh and is it still available in black or red?
Last edited by jboogie; Nov 4, 2009 at 12:35 PM. Reason: Automerged Doublepost
Senior Member
Joined: 02-03-08
Posts: 3,454
Likes: 1
From: Port Perry Ontario
revived! OK so trying to decide between the 1" and 1.25" would love the big bar for autocross but a little concerned for track days. How much throttle input is required to keep the backend behind you? If I lift to half throttle will it step out on me? And how quickly does it step out?: I've still got stock suspension otherwise on 245/35-18 Kumho XS.
Oh and is it still available in black or red?
Oh and is it still available in black or red?
Joined: 08-27-07
Posts: 21,561
Likes: 4
From: Jacksonville, FL
Senior Member
Joined: 02-03-08
Posts: 3,454
Likes: 1
From: Port Perry Ontario
my gay ass purple one is all dirtee and i cant hardly tell
I did the hoist test today. Hit my head on the frickin exhaust missed the sway bar...
sounds like you should order it on their next sale and you can have any frickin' color you want i will build it to order. Coz I know you know the importance of a changed roll center...
I did the hoist test today. Hit my head on the frickin exhaust missed the sway bar...
Last edited by qwikredline; Nov 6, 2009 at 09:18 PM. Reason: Automerged Doublepost
Senior Member
Joined: 09-23-08
Posts: 6,621
Likes: 0
From: Raleigh, NC
my gay ass purple one is all dirtee and i cant hardly tell
I did the hoist test today. Hit my head on the frickin exhaust missed the sway bar...
sounds like you should order it on their next sale and you can have any frickin' color you want i will build it to order. Coz I know you know the importance of a changed roll center...
I did the hoist test today. Hit my head on the frickin exhaust missed the sway bar...
sounds like you should order it on their next sale and you can have any frickin' color you want i will build it to order. Coz I know you know the importance of a changed roll center...
I want a flourescent pink one!
Senior Member
Joined: 02-03-08
Posts: 3,454
Likes: 1
From: Port Perry Ontario
you can have whatever you want, along with Kreibsan. Its called VOC (Voice Of the Customer)
or?
Very Onest Chit....
Now i know you have lost your mind on drugs. At least i lost mine from old age
Ur car is white you eat blueberries you chit purple. I rest my case
or?
Very Onest Chit....
Ur car is white you eat blueberries you chit purple. I rest my case
Last edited by qwikredline; Nov 6, 2009 at 09:22 PM. Reason: Automerged Doublepost
I need to get these, the spacers and rotated mounts...
Senior Member
Joined: 02-03-08
Posts: 3,454
Likes: 1
From: Port Perry Ontario
you are a bitch man. rack spacers for your b'day then....whats your drop so I can work out what you need for free....