since the thread hasnt been updated on how to connect the wideband...i was wondering if anyone has connected a lc-1 to hpt pro? i know the lc1 has a usb cable but how do it work with hpt? ive only worked with aem

 

There should be a single 0-5V wire coming off the module. Plug it into the input terminal.

Edit:
Found the right link....
http://www.hptuners.com/forum/showth...=lc-1+wideband

 

the white one right?

 

Either the yellow or brown... they are the same signal.

Edit: White is the system ground.

 

see im getting mixed feed back on this because the help on hpt says to take the outputs and put them to the 1 and 5 spots on the mpvi

******* headache...why cant everyone buy a plx or aem

 

Sorry... here is the exact wiring...

Hook the brown wire up to pin 1 on the EIO.
Hook up the black wire to pin 5 in the EIO.

Image...

 

life saver...so i run a wire from the connector to the 5 spot then the brown wire off of the gauge to the 1 spot...perfect

 

sweet this helps me out alot will hpt make corrections by itself to maintain a certin afr if you have it hooked up?

 

Hmmm. I've never seen that before. I.ve never had anything plugged into #5 of the pro interface. Just 1 wire to the #1. Works perfectly.

 

holy old thread bump batman

 

Oh, you mean that you don't need help with this anymore? Has your car actually ran since 2/08?

 

lol i dont own an lc1 ass...i tune people but not everyone has a uego

 

Oh. I am so sorry...


















...for you.

 

lawl...

 

this way does display wideband not narrow correct?

 

yes these are the wires that come off ur wideband to the mvpi