CSS Fitment Thread VOL. Stance or GTFO
Haz l33t wheelz.
Joined: 09-14-07
Posts: 18,883
Likes: 3
From: Costa Mesa CA
My coil over guide;
Install coilovers.
Leave car in the air, wheels off,
Bring the first lock ring up until it touches the spring, then give it a half turn to keep the spring from flopping about.
Take off the middle lock ring all together, then bring the bottom lock ring up to the one holding the spring.
Thread knuckle bracket all the way up until it cannot go further. Then adjust it so it bolts to the knuckle, and tighten down the bottom lock ring to keep that from moving.
Damping and ride height are personal preference.
Go low or go home
Joined: 05-15-11
Posts: 27,333
Likes: 584
From: Livonia, MI
What do you mean by adjust?
My coil over guide;
Install coilovers.
Leave car in the air, wheels off,
Bring the first lock ring up until it touches the spring, then give it a half turn to keep the spring from flopping about.
Take off the middle lock ring all together, then bring the bottom lock ring up to the one holding the spring.
Thread knuckle bracket all the way up until it cannot go further. Then adjust it so it bolts to the knuckle, and tighten down the bottom lock ring to keep that from moving.
Damping and ride height are personal preference.
Go low or go home
What do you mean by adjust?
My coil over guide;
Install coilovers.
Leave car in the air, wheels off,
Bring the first lock ring up until it touches the spring, then give it a half turn to keep the spring from flopping about.
Take off the middle lock ring all together, then bring the bottom lock ring up to the one holding the spring.
Thread knuckle bracket all the way up until it cannot go further. Then adjust it so it bolts to the knuckle, and tighten down the bottom lock ring to keep that from moving.
Damping and ride height are personal preference.
Go low or go home
My coil over guide;
Install coilovers.
Leave car in the air, wheels off,
Bring the first lock ring up until it touches the spring, then give it a half turn to keep the spring from flopping about.
Take off the middle lock ring all together, then bring the bottom lock ring up to the one holding the spring.
Thread knuckle bracket all the way up until it cannot go further. Then adjust it so it bolts to the knuckle, and tighten down the bottom lock ring to keep that from moving.
Damping and ride height are personal preference.
Go low or go home
I'll try this though.
Senior Member
Joined: 05-01-10
Posts: 3,463
Likes: 0
From: Toronto
Senior Member
Joined: 02-11-08
Posts: 1,179
Likes: 0
From: Valrico,FL
