More pics bro

 

Still working on the rear

 

heyyyyy sexy lady

 

DAMN murph! got a side view of the wheels?

 

I keep breakin axles fack

 

Not at the moment. Just wait. The rear will look like the front soon

 

You're going to need a pull from hell to get those things flush :P Can't wait to see it.

 

Just some camberzzz

 

-47 degrezzz

 

Lololol, should've saw the comparison in person to the static vs bags. I was subframe and lip lower then him doing work! Had 3 days to prepare my car for the show and got everything done but painting the brembo's lol. I did my best

 

you are the best

 

This.

 

Question for you gentlemen.

I'm not stanced so to speak but I have Ultraleggeras ( 18X8 +38 offset) and the rears tires are barley rubbing my inner fenders over certain bumps.

Has anyone rolled their rear fenders and if so how did it work out for you? I'm worried about the obvious cracking paint.

 

gm paint sucks and even with heat expect some minor cracks..... i rolled mine and ive done this many many times and even with a ton of heat i still got a 1 inch long crack on one side but its not on the outside its on the inside.

 

Damn, not quite what I wanted to hear hah. Thank you for the response.

 

if its on the inside who cares

what size are your tires?

 

I roll fenders with heat and a mallet. One crack on the inside only

 

They're only 235/40/18 Direzza Z2's

Overtime it will take off the paint and start to rust. Another gentleman who I contacted here with the same setup said he had the same issue and eventually downgraded to some 225 tires and it went away.

 

i assume your on coils? did you try to stiffen them up?

 

oh yea rust, i dont know think about that stuff haha

do these tires run a bit bigger than other 235s?

 

i have to downsize to 225's. my 235's rub bad but im also a lot lower. i have an appointment at horsepower techs to have all 4 rolled/pulled this week

 

I saw they offer that now, maybe I'll give them a call. I remember I asked them how much it would cost for an S2000 (was dead set on getting one) and the prices were reasonable I think.

Its 9" tread width but a quick look at the competitor tires in the same category tell me its on the bigger side. Half an inch bigger than RE-11's

A friend has a fender roller so I'm going to see what I can do this weekend before the next autocross on Monday.

Looks like theres a little room to roll in back and I really don't need much.

YYZ springs, I'll be getting Koni adjustable shocks next year.

 

your best bet is prob to drop to a 225

 

Thats so odd.

I am on SSC springs with 18x8 +35mm wheels on 235/40 nittos and I have zero rub anywhere..

 

they do good work from what i hear. ill let ya know how it goes.


stock wheels with 235/40's on it. rubs a little in the rear