Painted Wheels Gold Today
Thread Starter
Senior Member
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
2.7, 60#, CX FMIC, Exhaust, CAI, Full Tein Coilovers, strut, sway, tracing bars...yup all show you're right
mask off with painters tape, sand, prime, paint....finished
mask off with painters tape, sand, prime, paint....finished
Last edited by juststickit124; Mar 8, 2009 at 10:35 PM. Reason: Automerged Doublepost
Senior Member
Joined: 07-03-08
Posts: 580
Likes: 0
From: NJ
Thread Starter
Senior Member
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
600 grit wet sand
Rustoleum gray auto primer (any brand will work)
Rustoleum "Metallic Burnished Brass"
got to finish it first haha, front bumper isn't on, neither are any seats haha
Rustoleum gray auto primer (any brand will work)
Rustoleum "Metallic Burnished Brass"
got to finish it first haha, front bumper isn't on, neither are any seats haha
Last edited by juststickit124; Mar 9, 2009 at 01:47 AM. Reason: Automerged Doublepost
Thread Starter
Senior Member
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
Thread Starter
Senior Member
Joined: 03-09-06
Posts: 2,425
Likes: 0
From: "The Valley"-California
go for it, as you can see the results were awesome, mine took a long time cause i had to tape off the lip, if you're going to paint the whole wheel it shouldn't take too long, just make sure you have a lot of layers of paint so it doesn't scratch that easy. First coat is always really like, just to get it to stick, if you go with a heavy first coat it'll run and take forever to dry.
I did 3 light layers, then 2 heavy layers.
I'm not new but wtf does SOM mean?
I did 3 light layers, then 2 heavy layers.
I'm not new but wtf does SOM mean?
Last edited by juststickit124; Mar 9, 2009 at 03:29 PM. Reason: Automerged Doublepost
