Cobalt SS Network
RPM scale on op left, airflow scale on top right, horsepower scale on bottom left, torque scale on bottom right.
RPM scale on op left, airflow scale on top right, horsepower scale on bottom left, torque scale on bottom right.
0 2017/10/20 04:59:42
0 2017/10/20 05:19:17
0 2017/10/24 12:32:21
Wish I took a side view to show it better but if you look at the sway bar ends you can see why they need different length end links. The mounting points on the FE5 bar (top) are extended up, closer to the strut housing mounting point, relative to the FE1 bar(bottom).
Wish I took a side view to show it better but if you look at the sway bar ends you can see why they need different length end links. The mounting points on the FE5 bar (top) are extended up, closer to the strut housing mounting point, relative to the FE1 bar(bottom).
0 2017/10/30 12:18:51
FE5 end link (left) vs. FE1 end link (right)
FE5 end link (left) vs. FE1 end link (right)
0 2017/10/30 12:22:21
0 2017/10/31 07:45:47
0 2017/11/01 17:26:16
0 2017/11/02 11:00:38
I used the dash bezel piece I had previously purchased for an oil pressure gauge.
I used the dash bezel piece I had previously purchased for an oil pressure gauge.
0 2017/11/06 06:03:26
Installed AEM's inline filter while I was as it.
Installed AEM's inline filter while I was as it.
0 2017/11/06 06:04:16
Here is a picture of the flow gauge module. It is hard to see because of the wires I have it zip-tied to so it won't swing around in hard corners.
Here is a picture of the flow gauge module. It is hard to see because of the wires I have it zip-tied to so it won't swing around in hard corners.
0 2017/11/06 06:04:54
New water/meth pump with sleeve installed this time.
New water/meth pump with sleeve installed this time.
0 2017/11/06 06:05:50
Bypass solenoid that fail-safe system actuates.
Bypass solenoid that fail-safe system actuates.
0 2017/11/06 06:06:15
These are switches I had installed previously for a cooling fan setup that didn't end up using. The switch on the right is still not connected to anything but the switch on the left can route power to the bypass solenoid in a situation which I want to override the fail-safe from bypassing boost.
These are switches I had installed previously for a cooling fan setup that didn't end up using. The switch on the right is still not connected to anything but the switch on the left can route power to the bypass solenoid in a situation which I want to override the fail-safe from bypassing boost.
0 2017/11/06 06:06:55
Here is an image for visualization. Installed in this picture is FE5 strut with YYZ spring and FE1 end link and sway bar.
Here is an image for visualization. Installed in this picture is FE5 strut with YYZ spring and FE1 end link and sway bar.
0 2017/11/09 08:19:40
STOCK configuration mockup
STOCK configuration mockup
0 2017/11/09 13:39:13
Stock end link with 3" lowering springs
Stock end link with 3" lowering springs
0 2017/11/09 13:39:42
FE5 2" shorter end link combined with 3" lowering springs
FE5 2" shorter end link combined with 3" lowering springs
0 2017/11/09 13:40:06
0 2017/11/09 13:41:03
mockup of stock suspension geometry
mockup of stock suspension geometry
0 2017/11/09 13:42:06
same assembly with 3" drop
same assembly with 3" drop
0 2017/11/09 13:42:19
same assembly with 3" drop with 2" shorter (FE5) end links
same assembly with 3" drop with 2" shorter (FE5) end links
0 2017/11/09 13:42:34
0 2017/11/09 13:44:59
Mockup of stock configuration
Mockup of stock configuration
0 2017/11/09 13:45:15
Same assembly with 3" lowering spring
Same assembly with 3" lowering spring
0 2017/11/09 13:45:20
Same assembly with 3" lowering spring and 2" shorter FE5 end link
Same assembly with 3" lowering spring and 2" shorter FE5 end link
0 2017/11/09 13:45:23
Mock stock configuration
Mock stock configuration
0 2017/11/09 13:46:26
Same assembly with 3" lower spring
Same assembly with 3" lower spring
0 2017/11/09 13:46:54
Same assembly with 3" lowering spring and 2" shorter FE5 end link
Same assembly with 3" lowering spring and 2" shorter FE5 end link
0 2017/11/09 13:47:28
Same assembly with 3" lowering spring and 2" shorter FE5 end link
Same assembly with 3" lowering spring and 2" shorter FE5 end link
0 2017/11/09 13:48:19
Same assembly with 3" lowering spring AND 2" shorter FE5 end link
Same assembly with 3" lowering spring AND 2" shorter FE5 end link
0 2017/11/09 13:48:55
0 2017/11/09 13:49:25
0 2017/11/13 05:30:33
0 2017/11/13 05:40:32
0 2017/11/13 05:40:40
New headlights but still with old chipped up grill and old milky turn signal assemblies.
New headlights but still with old chipped up grill and old milky turn signal assemblies.
0 2017/11/20 05:21:04
0 2017/11/20 05:22:08
Freshly painted grill with new lights
Freshly painted grill with new lights
0 2017/11/20 05:22:37
0 2017/11/20 05:22:44
Took this picture to demonstrate difference between old yell incandescent bulbs and plug n play LED bulbs.
Took this picture to demonstrate difference between old yell incandescent bulbs and plug n play LED bulbs.
0 2017/11/20 05:23:17