Just one more question lol. I have to replace my belt very soon. I have done them before but the tensioner was always a pulley. This seems to have a tensioning arm. Do i loosen the big bolt under the pully. If so whats the best way to get to the bottom pullys to put the belt around them. How would I be able to put tension on it again...here are some pics

 

theres a spot behind the pully where you can put an wrench open side and just push down it'll compress it and just pull off the belt..not hard

 

Take a 15mm open end wrench and push down on the notch on the other side of the tensioner. It really helps to have a friend help you with this. And when putting the belt on, put the belt on the tensioner FIRST and then the s/c or else you will have one hell of a time getting the thing on. lol

 

Those are kinda vague..but they help...so your saying I dont have to loosen any bolts or anything???

 

nope..just use the open ended side of the wrench and push down

 

ok i just tried that the metal piece behind and the the right of the pully...the wrench hit the pully and was starting to crush the side down...so i stopped...it did move though

 

Why the hell did you stop?

 

uhh the wrench shouldn't be hitting the pully man try turning the wrench around so the bend is the other way maybe?

 

ill just find something else to pry it with...gotta head to work now...is there anyway you can increase the tension to the belt..mine is a lil bit loose