2.0L LSJ Performance Tech 205hp Supercharged SS tuner version. 200 lb-ft of torque.

INTENSE Announces New Dyno Proven Stage Kits!

Thread Tools
 
Search this Thread
 
Old 05-18-2006, 05:59 PM
  #1  
Former Vendor
Thread Starter
 
Bad GTP's Avatar
 
Join Date: 12-13-05
Location: Westerville OH
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Talking INTENSE Announces New Dyno Proven Stage Kits!

INTENSE Dyno Proven Stage Kits

Here are the highlights (rated conservatively, of course):

Stage 1 = 11 psi boost and up to 235 WHP and 215 WTQ

Stage 2 = 13 psi boost and up to 245 WHP and 230 WTQ

Stage 3 = 15 psi boost and up to 255 WHP and 245 WTQ

Stage 4 = 17 psi boost and up to 265 WHP and 260 WTQ

Stage 5 = 19 psi boost and up to 275 WHP and 275 WTQ

Old 05-18-2006, 06:04 PM
  #2  
Senior Member
 
CobaltSS313's Avatar
 
Join Date: 04-03-05
Location: Pittsburgh, PA
Posts: 1,959
Received 0 Likes on 0 Posts
i was on there earlier and they didnt have them, they must have just put them up. They are sick a hell.
Old 05-18-2006, 06:09 PM
  #3  
Senior Member
 
CobaltBurst's Avatar
 
Join Date: 06-08-05
Location: U.S.A.
Posts: 2,152
Likes: 0
Received 0 Likes on 0 Posts
does the phase 5 work on 06's? its not listed in the drop down...
Old 05-18-2006, 06:10 PM
  #4  
Senior Member
 
Tomtwtwtw's Avatar
 
Join Date: 03-30-06
Location: Chandler, AZ
Posts: 5,491
Likes: 0
Received 0 Likes on 0 Posts
Very nice.
Old 05-18-2006, 06:16 PM
  #5  
Former Vendor
Thread Starter
 
Bad GTP's Avatar
 
Join Date: 12-13-05
Location: Westerville OH
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Please note that we're going to hold off a little bit on the '06 Redline PCM's, since we haven't had the opportunity to dyno tune one yet. With the availability of HP Tuners, any vendor can start shipping PCM's immediately, but the right thing to do is invest the time and money for a custom dyno tuning session first. If you have an '06 Redline with stock airbox and want to volunteer for this, please email me at ScottC@INTENSE-Racing.com.
Old 05-18-2006, 06:16 PM
  #6  
Senior Member
 
FAST06SS's Avatar
 
Join Date: 12-07-05
Location: Indianapolis
Posts: 964
Likes: 0
Received 0 Likes on 0 Posts
Hell of deal!!!!!
Old 05-18-2006, 06:18 PM
  #7  
Member
 
maxpit's Avatar
 
Join Date: 12-06-05
Location: San Diego
Posts: 294
Likes: 0
Received 0 Likes on 0 Posts
What are they using to tune the PCM?
Old 05-18-2006, 06:22 PM
  #8  
Former Vendor
Thread Starter
 
Bad GTP's Avatar
 
Join Date: 12-13-05
Location: Westerville OH
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
We use a combination of GM SPS, EASE, HP Tuners and our hand-built electronic P.I.M.P. That stands for PCM Interface Module Prototype.
Old 05-18-2006, 06:22 PM
  #9  
Senior Member
 
Blown 4-banger's Avatar
 
Join Date: 04-03-06
Location: Mesa, AZ
Posts: 7,571
Likes: 0
Received 0 Likes on 0 Posts
Well... IM SELLING EVERY THING I OWN EXCEPT MY CAR!!!!!!!!!!!!! I NEED TO SAVE UP 1000 BUCKS AS QUICKLY AS POSSIBLE!!!!!!!!! ANY DONATIONS ARE WELCOME
Old 05-18-2006, 06:22 PM
  #10  
Senior Member
 
CobaltBurst's Avatar
 
Join Date: 06-08-05
Location: U.S.A.
Posts: 2,152
Likes: 0
Received 0 Likes on 0 Posts
n/m i see the 06 now

You’ll want to invest in some sort of scan gauge to monitor KR and have a better understanding of everything when you run this much boost.

and whats a KR? Will you customize the ECM to our current mods, like intake/exhaust/header??
Old 05-18-2006, 06:26 PM
  #11  
Senior Member
 
Blown 4-banger's Avatar
 
Join Date: 04-03-06
Location: Mesa, AZ
Posts: 7,571
Likes: 0
Received 0 Likes on 0 Posts
yeah I wanted to know that too. I know what AFR is but not KR?
Old 05-18-2006, 06:28 PM
  #12  
Senior Member
 
M88ArRamadi's Avatar
 
Join Date: 04-24-06
Location: Chester, VA
Posts: 1,948
Likes: 0
Received 0 Likes on 0 Posts
$1,000?!?......SOLD!! I've waited for this (PCM+higher Stage kit) for too long now. Thanks Guys

KR = Knock Retard
Old 05-18-2006, 06:33 PM
  #13  
Senior Member
 
BlackSS/SC's Avatar
 
Join Date: 07-18-05
Location: Canada eh!
Posts: 2,130
Likes: 0
Received 0 Likes on 0 Posts
KR is short for Knock Retard. The PCM retards the timing when it detects detonation. Can be very bad and wreck and engine quick if it's bad enough. The knock sensor in the engine block is set up to pick up certain noise frequency in the block that could be knock.
Old 05-18-2006, 06:45 PM
  #14  
Senior Member
 
arsenal21's Avatar
 
Join Date: 12-10-04
Location: Cleveland, OH
Posts: 1,206
Likes: 0
Received 0 Likes on 0 Posts
How much would it cost for an install by you guys in Plain City, like Intense Stage 5?
Old 05-18-2006, 06:49 PM
  #15  
Senior Member
 
FLCobalt's Avatar
 
Join Date: 07-24-05
Location: florida
Posts: 1,395
Likes: 0
Received 1 Like on 1 Post
awesome to think for $1000 bucks i can have a car almost as fast as an evo.
Old 05-18-2006, 06:51 PM
  #16  
Senior Member
 
FLCobalt's Avatar
 
Join Date: 07-24-05
Location: florida
Posts: 1,395
Likes: 0
Received 1 Like on 1 Post
so where are the dynos?
Old 05-18-2006, 07:02 PM
  #17  
Senior Member
 
l Sh1ft l's Avatar
 
Join Date: 04-24-06
Location: Canton Ohio
Posts: 2,191
Likes: 0
Received 0 Likes on 0 Posts
210$ more for 10hp and 15 torque and 2 pci of boost... I'd go w/ stage 4 if it was me.
Old 05-18-2006, 07:03 PM
  #18  
Senior Member
 
Blown 4-banger's Avatar
 
Join Date: 04-03-06
Location: Mesa, AZ
Posts: 7,571
Likes: 0
Received 0 Likes on 0 Posts
Yeah I was lookin for some dyno sheets. Also the cars that were tested, were they stock, or did they have other mods (intake, exhaust ect.)?
Old 05-18-2006, 07:04 PM
  #19  
Senior Member
 
l Sh1ft l's Avatar
 
Join Date: 04-24-06
Location: Canton Ohio
Posts: 2,191
Likes: 0
Received 0 Likes on 0 Posts
I might be a little off today lol but how exactly do these kits work? Whats in them? I clicked and couldn't figure it out.
Old 05-18-2006, 07:13 PM
  #20  
Senior Member
 
plyboy-illest's Avatar
 
Join Date: 01-02-05
Location: Toronto (woodbridge)
Posts: 5,183
Likes: 0
Received 0 Likes on 0 Posts
those are some really kick ass #'s
Old 05-18-2006, 07:14 PM
  #21  
Senior Member
iTrader: (3)
 
BooSSted's Avatar
 
Join Date: 11-07-05
Location: Bantario
Posts: 3,247
Likes: 0
Received 0 Likes on 0 Posts
I am looking at the Stage 4 kit, However I already have the Pulleys and the Oversized Tensioner pulley. I don't need the machined snout either. How much would the kit cost without these items?

All I realy need is:
Injectors
ECU
Wiring Harness
Plugs

What do you use the Supercharger oil for? Just oiling the rotors? or is it used when re-installing the snout?
Old 05-18-2006, 07:25 PM
  #22  
Senior Member
iTrader: (3)
 
BooSSted's Avatar
 
Join Date: 11-07-05
Location: Bantario
Posts: 3,247
Likes: 0
Received 0 Likes on 0 Posts
Quick calculation came out to approx $410 Can you verify that for me! If you can sell it for that price for just those parts I will cancel my GM Stage 1 order and buy this one.

Also, Does your PCM increase the rev limit at all?
Old 05-18-2006, 07:42 PM
  #23  
Senior Member
 
GSoccer24's Avatar
 
Join Date: 11-15-05
Location: Newton Highlands, Massachusetts
Posts: 2,693
Likes: 0
Received 0 Likes on 0 Posts
so the old Stage 3 kit is gone with the wind? dumb question but i assume if i wanted those parts, i could just piece it together, or do you guys not recommend that setup anymore??

just asking, maybe i haven't read enough yet...
Old 05-18-2006, 07:45 PM
  #24  
Former Vendor
Thread Starter
 
Bad GTP's Avatar
 
Join Date: 12-13-05
Location: Westerville OH
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
so where are the dynos?
We've posted several of them on this message forum in the last couple of days. Tomorrow we'll try to add the respective charts on each Stage page.


How much would the kit cost without these items?
Each of the items in every stage kit is available a la carte. Just click on the link for each item, and you can see the pricing for each.


I might be a little off today lol but how exactly do these kits work? Whats in them?
Each Stage kit has different contents. If you click on the Stage 1 kit, you'll see a list of it's contents, etc.


those are some really kick ass #'s
And they're conservative too.
Old 05-18-2006, 07:47 PM
  #25  
Former Vendor
Thread Starter
 
Bad GTP's Avatar
 
Join Date: 12-13-05
Location: Westerville OH
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
so the old Stage 3 kit is gone with the wind?
We've replaced it with our new and improved Stage 3 kit.


dumb question but i assume if i wanted those parts, i could just piece it together, or do you guys not recommend that setup anymore??
Yes, you can still piece together anything you want. We offer all the contents of each kit a la carte.


Quick Reply: INTENSE Announces New Dyno Proven Stage Kits!



All times are GMT -4. The time now is 12:23 PM.