Anyone with Synapse intercooler chime in!
New Member
Joined: 01-15-09
Posts: 164
Likes: 0
From: Houston, TX
Maaan it sucks i wasnt even acting stupid or showing off like when i usually **** **** up. I was just leaving the shell station and they have this HUGE incline that i bottomed out on, it ripped the bottom of my intercooler off. In all fairness it was held on by plastic clips and thats just stupid an IC should never have any plastic parts on it.
At least i have a good excuse to get a nice IC and charge pipes!!
At least i have a good excuse to get a nice IC and charge pipes!!
i had the grille on mine for the winter, but now its off. I hit a piece of tire at about 70mph on the interstate with no lower grille and it did hit the intercooler but never hurt anything.
New Member
Joined: 08-20-09
Posts: 55
Likes: 0
From: FL
Nothing major
bascially trim out the entire inner skeleton from around the foglamp areas... and it'll take you a couple times of taking the bumper on and off... but you'll see exactly where it hits...
I used a very sharp box knife, and it worked great.
Love the intercooler saw a drop of 20* in my IAT2s. Today ambient temp was 80* IAT1 was 75* and my IAT2s were 78*
It's doing a good job!
I used a very sharp box knife, and it worked great.
Love the intercooler saw a drop of 20* in my IAT2s. Today ambient temp was 80* IAT1 was 75* and my IAT2s were 78*
It's doing a good job!
Last edited by jas09ss; Oct 17, 2009 at 05:23 PM. Reason: Automerged Doublepost
Member
Joined: 06-12-08
Posts: 276
Likes: 0
From: Albany, NY
We are glad most of you like our intercooler setup, we have also just released a few improvements for those that are boosting at extreme levels. Basically we just added a few renforcements on the cooler endtanks so that the boost levels can't fatigue the endtanks. This will be added on all intercoolers being shipped and if anyone would like this added to their old cooler we will do it for free and cover shipping both ways. Thanks for the continued support ss community!
Now that is company that I would like to buy parts from. Most companies would just say sorry
Senior Member
Joined: 09-23-08
Posts: 6,621
Likes: 0
From: Raleigh, NC
We are glad most of you like our intercooler setup, we have also just released a few improvements for those that are boosting at extreme levels. Basically we just added a few renforcements on the cooler endtanks so that the boost levels can't fatigue the endtanks. This will be added on all intercoolers being shipped and if anyone would like this added to their old cooler we will do it for free and cover shipping both ways. Thanks for the continued support ss community!
We are glad most of you like our intercooler setup, we have also just released a few improvements for those that are boosting at extreme levels. Basically we just added a few renforcements on the cooler endtanks so that the boost levels can't fatigue the endtanks. This will be added on all intercoolers being shipped and if anyone would like this added to their old cooler we will do it for free and cover shipping both ways. Thanks for the continued support ss community!
We are glad most of you like our intercooler setup, we have also just released a few improvements for those that are boosting at extreme levels. Basically we just added a few renforcements on the cooler endtanks so that the boost levels can't fatigue the endtanks. This will be added on all intercoolers being shipped and if anyone would like this added to their old cooler we will do it for free and cover shipping both ways. Thanks for the continued support ss community!
you guys are badass.
New Member
Joined: 11-16-06
Posts: 95
Likes: 0
From: Fort Sill, OK
First of all i have searched and couldnt find anything!
Im looking at puchasing the synapse intercooler but i would like to know how much, if any had to be trimmed off the bumper. Im not too keen on cutting my bumper on a new car.
Also have you had any troubles with the intercooler
Im looking at puchasing the synapse intercooler but i would like to know how much, if any had to be trimmed off the bumper. Im not too keen on cutting my bumper on a new car.
Also have you had any troubles with the intercooler
Thread
Thread Starter
Forum
Replies
Last Post
XStylus
Forced Induction
2
Sep 16, 2015 06:19 AM