Intake Camshaft Sensor ISSUE!!!!!!
#302
Senior Member
iTrader: (4)
Join Date: 04-21-09
Location: hawaii
Posts: 2,129
Likes: 0
Received 0 Likes
on
0 Posts
i recommand using the high temp red rtv over the black oil type rtv. because the red rtv can support an extra 150+ degree over the black and you can still use it in place where oil are gonna be.
btw, i just fixed all three of the leaks. the cap, sensor, and the pump using the red high temp rtv. gotta wait 24 hours cure time. so i will go and check tomorrow afternoon.
btw, i just fixed all three of the leaks. the cap, sensor, and the pump using the red high temp rtv. gotta wait 24 hours cure time. so i will go and check tomorrow afternoon.
Last edited by fakameanrepresent; 10-10-2009 at 10:03 PM. Reason: Automerged Doublepost
#303
Senior Member
Can someone here remind me why I should keep this car? She's been in the dealership for over a week because she won't make boost, and they cant figure out why, before that she was poppin'g fuel trim codes left and right, and now I have this to look forward too? Hell the car only has 14k on it and it's spent more time at the dealer than at my house, WTF?
Yeah it's nice to have performance, but I'll take 100 ftlbs of torque over constantly broken any day, I'm starting to wish I had gotten the first gen Speed3
-Alex
Yeah it's nice to have performance, but I'll take 100 ftlbs of torque over constantly broken any day, I'm starting to wish I had gotten the first gen Speed3
-Alex
#304
i recommand using the high temp red rtv over the black oil type rtv. because the red rtv can support an extra 150+ degree over the black and you can still use it in place where oil are gonna be.
btw, i just fixed all three of the leaks. the cap, sensor, and the pump using the red high temp rtv. gotta wait 24 hours cure time. so i will go and check tomorrow afternoon.
btw, i just fixed all three of the leaks. the cap, sensor, and the pump using the red high temp rtv. gotta wait 24 hours cure time. so i will go and check tomorrow afternoon.
did you see all 3 places leak like gimpster
#305
Senior Member
Can someone here remind me why I should keep this car? She's been in the dealership for over a week because she won't make boost, and they cant figure out why, before that she was poppin'g fuel trim codes left and right, and now I have this to look forward too? Hell the car only has 14k on it and it's spent more time at the dealer than at my house, WTF?
Yeah it's nice to have performance, but I'll take 100 ftlbs of torque over constantly broken any day, I'm starting to wish I had gotten the first gen Speed3
-Alex
Yeah it's nice to have performance, but I'll take 100 ftlbs of torque over constantly broken any day, I'm starting to wish I had gotten the first gen Speed3
-Alex
#306
New Member
Join Date: 11-11-11
Location: Germantown, Maryland
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Oil Leaks
Ive been reading around through this thread and noticed they have been dated from 2009... Does anyone know if GM has created a new sensor or seal that has fixed this problem? I am looking into getting a 2008 T/C but if its going to have problems with leaking oil i may have to rethink it. Do yall have an easy fix or know of a proper fix for this kind of problem?
Hope to hear from yall soon!
Hope to hear from yall soon!
#307
Senior Member
Ive been reading around through this thread and noticed they have been dated from 2009... Does anyone know if GM has created a new sensor or seal that has fixed this problem? I am looking into getting a 2008 T/C but if its going to have problems with leaking oil i may have to rethink it. Do yall have an easy fix or know of a proper fix for this kind of problem?
Hope to hear from yall soon!
Hope to hear from yall soon!
#308
How's it going I'm new on here and i have a question on my 08 cobalt while I'm driving my car jerks like it wants to die and the rpm go to 0 but the car still drives acually better and also sometimes dies the check engine light came on today and it said it could be the cam shaft sensor any advice on what it could be
Thread
Thread Starter
Forum
Replies
Last Post
OrangeCoba
Problems/Service/Maintenance
0
09-25-2015 06:06 PM