Manual Boost Controller Question
Thread Starter
Senior Member
iTrader: (16)
Joined: 12-22-08
Posts: 8,356
Likes: 1
From: Rochester, New York
It's a shame that HPT has not unlocked that table, because they really need to be tuned together. IMO, it is bad practice to rely on the ECU to make massive swings in WG duty cycles to compensate for target load. Likewise, I think it is poor practice to simply crank WGDC to 95%. I prefer to roll off load. If the target loads are significantly lower than 95% would cause, then it has to drastically compensate again.
Fortunately, for my purposes, the stock WGDC tables work fine for me. I'm not trying to get heroic amounts on the top end, on the stock turbo.
Fortunately, for my purposes, the stock WGDC tables work fine for me. I'm not trying to get heroic amounts on the top end, on the stock turbo.
The TF base file only raises the max to 95% wg dc, it still controls (much better btw) to commanded.
Thread
Thread Starter
Forum
Replies
Last Post