Throwing codes
Hey whats up guys, new owner of a 2010 ss/tc here. ran into some issues the other day, took the car out and did a WOT 2nd to 3rd pull. soon as i hit 3rd car stopped building boost, like it went into safe mode. it proceeded like this for a little while until i cut it off and back on. After that it was fine and running normal. i wanted to test it one more time, so this was a 3rd to 4th and this time got a flashing check engine light. it stopped flashing when i let off, i scanned the codes and they were p2270, p0140, and p0304 cylinder 4 misfire.
I cleared the codes and did a quick spin around the block and let it idle for a bit and nothing came back. this has never happened to the car before and the car is unmodified aside from GMS1.
I did a search but still not exactly sure where to go from here, i understand p2270 and p0140 are 02 sensor codes but aren't these for the ones after the cat? Any help would be appreciated.
I cleared the codes and did a quick spin around the block and let it idle for a bit and nothing came back. this has never happened to the car before and the car is unmodified aside from GMS1.
I did a search but still not exactly sure where to go from here, i understand p2270 and p0140 are 02 sensor codes but aren't these for the ones after the cat? Any help would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post



