k so i just got my car put back together after replaceing the vavles started it up it runs good it hasnt been wanting to start on the first try but other than that its runs good but i keep getting a check engine light for: camshaft to crankshaft correlation bank 1 sesor B ive reset it and it just comes back i lined up the timing marks right i double checked it before i sealed everything up any ideas???

 

no one has any ideas??

 

Take it too an advanced auto parts or auto zone and they will scan the code for you for..wait for it..FREE

 

I had a problem with mine last week after replacing the head gasket. I was the cam sensor unplugged. I was getting check engine light and took couple tries to start.

 

^^ what he said or the cam sensor is not timed correctly

 

i have acess to a scanner and it says camshaft to crankshaft correlation bank 1 sensor B

ive already checked all my connections and there all hooked up

see this is where i get confused cuz i lined everthing up on the marks i dont understand what would make it lined up correctly?

 

ok bring number 4 cylnder up on tdc compression stroke align the timing marks on the cps housing 11 oclock

 

Did you make sure you did the timing proceedure correctly? Did you make sure the camshaft sensor is lined up correctly? It definitely sounds like a timing issue of some kind.

 

yes on the timing however i didnt know about the cam sensor how do i check that???

 

ok bring number 4 cylnder up on tdc compression stroke there is a mark on the hex wheel and a mark on the housing line those up and install

 

k thx ill give that a try tommorow