Help TVS tuning
Thread Starter
Senior Member
Joined: 02-13-11
Posts: 2,469
Likes: 1
From: Tri-Cities, WA
Does anyone know the part number for our MAF sensor Rock auto shows a few but I'm confused
Omni from what I've told you do you think the MAF is faulty or not, I don't want to replace it for no reason
Omni from what I've told you do you think the MAF is faulty or not, I don't want to replace it for no reason
Last edited by Mendomar06; Mar 18, 2013 at 08:40 PM. Reason: Automerged Doublepost
you dont have access to another maf? go buy one local and if thats not the problem then return the maf or borrow a maf from some1
Thread Starter
Senior Member
Joined: 02-13-11
Posts: 2,469
Likes: 1
From: Tri-Cities, WA
It probably does lol and like I said I have a 3.0" pulley for it, when I have time to take the car back to him I will (I'm about 1 hr away from where he lives). I don't drive the car on a daily basis so it is going to sit until hopefully this weekend.
As most have said, on 93 you will need a larger pulley. I run a 2.7 and im on E85 and have a ported head. so it wont blow my engine. Like MRB said, 2.9 might be your sweetspot. Looks like you have the supporting mods. Do you have E85 anywhere close? Its worth running with a TVS. If not meth is another option, just make sure its always full and you check to make sure its working well periodically.
Member
Joined: 03-12-07
Posts: 359
Likes: 4
From: Kennewick, WA
Thread Starter
Senior Member
Joined: 02-13-11
Posts: 2,469
Likes: 1
From: Tri-Cities, WA
Yea I heard of that one but problem is I'm working with my dad in Mattawa, that's a 45min drive to Richland and if I need to pump gas it's going to be a hassle lol. I'm up for meeting up sometime, I'll pm you my number.
Thread Starter
Senior Member
Joined: 02-13-11
Posts: 2,469
Likes: 1
From: Tri-Cities, WA