Hey guys I was wondering how much more power you get going with a 2.6 pulley 60pound injectors over a 2.7 and 60 pounders. Do you need cooling mods? How much more power on the dyno/ and torque?

Thanx Colin

 

Cooling mods would be a must, get as many cooling mods as possible. You should gain about 10 wtq.

 

6 whp 9 tq, you will want cooling mods at the point your at now.

 

I already have meth but don't run it all the time....So would you recomand just the Cobra Heat Exchanger or the dual bypass + HE?

 

with a 2.6 or 2.7 your going to want every cooling mod that exists, ported blower, heat exchanger, water methanol injection, and the dual pass plate

 

I would recommend you get that immediately for the 2.7... dual pass and HE

 

I recommend at least the dual pass mod since you already have meth. A 2.8" or smaller pulley will result in your blower heatsoaking after one pull without cooling mods. I definitely recommend the 2.6" pulley, a dual pass, and methanol/water mix spraying right before the blower as that's the setup I run. With the PROPER TUNE, your car can hual ass, still be reliable, and you can touch your blower right after the pulls and it'll be cool!.