HTV 1320 with 2.75"
i could do it on this tune if i really wanted to i would just have to put some work inot a few parts
Last edited by lsjwannabe; Apr 22, 2008 at 12:29 AM. Reason: Automerged Doublepost
lol, yeah i wish i would have got a over lay with my old dyno but i didn't the thing is its not even about the peak numbers this thing makes more power all over the place
I'm definately not knocking the numbers...but I was hoping for numbers like that on the 3.1" pulley setup with no methanol....and no return fuel set up either....I know these are good numbers but I've been debating on whether to continue to save money for the tvs or wait til a ss/tc appears at one of my dealers and i'm leaning towards turbo I think......AGAIN, not knocking lsj's car bc I think they are great numbers just was expecting more personally....between the RL not breaking into 12's when he has meth. inj. and then these numbers on the 2.75" I'm a lil shocked.....How many lbs. were you boostin?
I'm hoping someone can bolt this thing on with 60's and a dual pass with fm h/e with full exhaust and make 320 whp...as a tester lsj...do you think thats possible on a 3.1" set up?
I'm hoping someone can bolt this thing on with 60's and a dual pass with fm h/e with full exhaust and make 320 whp...as a tester lsj...do you think thats possible on a 3.1" set up?
I'm definately not knocking the numbers...but I was hoping for numbers like that on the 3.1" pulley setup with no methanol....and no return fuel set up either....I know these are good numbers but I've been debating on whether to continue to save money for the tvs or wait til a ss/tc appears at one of my dealers and i'm leaning towards turbo I think......AGAIN, not knocking lsj's car bc I think they are great numbers just was expecting more personally....between the RL not breaking into 12's when he has meth. inj. and then these numbers on the 2.75" I'm a lil shocked.....How many lbs. were you boostin?
I'm hoping someone can bolt this thing on with 60's and a dual pass with fm h/e with full exhaust and make 320 whp...as a tester lsj...do you think thats possible on a 3.1" set up?
I'm hoping someone can bolt this thing on with 60's and a dual pass with fm h/e with full exhaust and make 320 whp...as a tester lsj...do you think thats possible on a 3.1" set up?
I'm definately not knocking the numbers...but I was hoping for numbers like that on the 3.1" pulley setup with no methanol....and no return fuel set up either....I know these are good numbers but I've been debating on whether to continue to save money for the tvs or wait til a ss/tc appears at one of my dealers and i'm leaning towards turbo I think......AGAIN, not knocking lsj's car bc I think they are great numbers just was expecting more personally....between the RL not breaking into 12's when he has meth. inj. and then these numbers on the 2.75" I'm a lil shocked.....How many lbs. were you boostin?
I'm hoping someone can bolt this thing on with 60's and a dual pass with fm h/e with full exhaust and make 320 whp...as a tester lsj...do you think thats possible on a 3.1" set up?
I'm hoping someone can bolt this thing on with 60's and a dual pass with fm h/e with full exhaust and make 320 whp...as a tester lsj...do you think thats possible on a 3.1" set up?
I think its do-able...
Last edited by lnf08ecotec; Apr 22, 2008 at 12:42 AM. Reason: Automerged Doublepost
ur right though...i totally forgot that you were on the dyno you used...after reading how its the same dyno that gave you 253 on a 2.5" m62 i'm feeling a lil better...you know what would boost my confidence in this thing...u running the 1/4 with no meth. and hitting 12's...whatcha think?
tvs w/ 3.1"
#60's
stock fuel set up
stock internals
JBP header
ZZP 2.5" DP w/ cat
Megan 2.5" exhaust
TTR Mount
JBP Crank Pulley
Dual Pass Endplate with front mount h/e...most likely option b but no meth.
Injen CAI
tune w/ as much advanced timing as possible...safety first....
so u thinking recipe for disaster or do-able?
its either that or lnf and catless dp, and 3" exhaust with JBP crank pulley and new IC piping...and we'll c what happens after a tune
I'm sort of thread jacking and for that I'm sorry...Just trying to get as mcuh info. as possible from ya since you're a tester.....I'll direct all further q's to PM's.......thanks
Last edited by lnf08ecotec; Apr 22, 2008 at 12:55 AM. Reason: Automerged Doublepost
for the price...i dont c how you can beat it...unless your cammed and are looking for serious power up top......their header claims srs gains down low and into the mid range....and that's what i'm looking for right now then when/ if I get cams then we'll c what I go to then...we'll c when the "cobalt-addiction" ends, lol...right now though its a money pit; a high i can't come off of...and I'm phening for more, jk...but srsly I'm having tranny issues right now and bc I work...ed for GM my old serive manager and DSM are working to get me another afmrkt clutch bc this damn clutchmasters is going through release bearings everytime i put a new one in.....so I'm sick of my car already but everyitme I walk out onto the driveway I fall in love again.....and I have way more plans for this car and have a lil list going for the lnf if i get one, lol..i bought the k sport coilvers just so if i get the lnf i can just slap them on there day 1,,,or if i keep my car then i'll put them on there......its bad...i know
Thanks for posting this lsj! This is what I am looking for, I would like to see the area under the curve on the dyno, is the average torque high and does it come in early? If you get a chance I would love to see the dyno sheet.
Great numbers and good work!!!
Great numbers and good work!!!
for the price...i dont c how you can beat it...unless your cammed and are looking for serious power up top......their header claims srs gains down low and into the mid range....and that's what i'm looking for right now then when/ if I get cams then we'll c what I go to then...we'll c when the "cobalt-addiction" ends, lol...right now though its a money pit; a high i can't come off of...and I'm phening for more, jk...but srsly I'm having tranny issues right now and bc I work...ed for GM my old serive manager and DSM are working to get me another afmrkt clutch bc this damn clutchmasters is going through release bearings everytime i put a new one in.....so I'm sick of my car already but everyitme I walk out onto the driveway I fall in love again.....and I have way more plans for this car and have a lil list going for the lnf if i get one, lol..i bought the k sport coilvers just so if i get the lnf i can just slap them on there day 1,,,or if i keep my car then i'll put them on there......its bad...i know
Last edited by lsjwannabe; Apr 22, 2008 at 01:11 AM. Reason: Automerged Doublepost


