hey guys real quick, if i cut my stock resonator out will this be perfect length to replace with? i did plenty of research on the stock exhaust. it's pretty good except for everything after the axle. so i'd figure replace the resonator and call it a day... so a simple yay or nay will work. Thank You everyone

http://www.jegs.com/i/Magnaflow/642/14821/10002/-1#

 

this will not work if you are trying to replace your resonator with it.

 

that's a muffler, not a resonator.

 

Thats a muffler... not a resonator.

 

unless you are talking about taking off your resonator and muffler then putting this on at the back to replace the muffler... that would work... but wouldnt sound good

 

thats a muffler,..not a resonator

 

you know what i mean i want pretty much nothing but pipe and a muffler on the end.

 

yea you can do that, but it will sound pretty bad. very raspy and loud.

 

But we dont though...

If your trying to remove the resonator just so its a straight pipe with a muffler, its gonna sound funky. I got a resonator welded in right away with my cat back.

If your trying to replace the muffler, and go with what you linked in the first post, its gonna change the tone a little bit.