harryresh

iTrader: (6)

i put a SPEC clutch in and now the clutch doesnt catch until the clutch pedal is all but the whole way up. is there any adjustment for this? its harder to control when your foot is off the floor and and you have to lift your whole leg before it starts grabbing.

G11

iTrader: (11)

i don't think that there is from the outside....

rollingboostedss

you may want to try to bleed the system again see if that helps

cobaltss_man

i was actually wonderinbg about this as well cause ive noticed that since its gotten warmer out it almost feels too easy. still grabs near spot ive been used to but i seem to slip it more than i was used to .

Jrhdpaintball

you might want to look into zzp adjust clutch rod. sometimes with stiffer clutchs the clutch rod can get bent. you should see some of the pics people have of their bent rod..... no homo lol

rollingboostedss

never heard of that . but I know a buddy with his supra when the clutch would start to engage like this it meant that the clutch was on its way out. I have a clutch master stage 3 in mine and it started letting out up top last week but I don't think I bleed it good enough

harryresh

iTrader: (6)

if there was air in the system the clutch would either never engage or engage @ the bottom of the pedal stroke. mine is engaging @ the top of the pedal stroke

JCobalt

im pretty sure thats normal both of my spec stage 3 clutches engaged at the top of the pedal travel.