I recently purchased Cams From Comp cams For a turbo setup
Stage 2 Street and Strip Rpm Range 2500- 7500
And 92# Valve Springs from Supertech.

I Just want to ask if these Springs are going to be to Much for the cams Since I can't Find anything Saying what's The Best combination or anything really.I just read that if Your springs have to High of a rating for the cam it can cause Lobe wearing.

And Also If these cams are even good for a turbo setup I Recently figured out they have a grind for turbo On the L61 But I didnt see them when I bought mine.

 

You know you have to get new valve seats with those and you have to have a really good tuner to run them cams with a turbo set up