2.2L L61 Performance Tech 16 valve 145 hp EcoTec with 155 lb-ft of torque

A new hope (Trifecta Tune)

Thread Tools
 
Search this Thread
 
Old Aug 12, 2009 | 08:06 PM
  #26  
cobaltfan10110's Avatar
Thread Starter
New Member
 
Joined: 02-11-09
Posts: 58
Likes: 0
From: Elgin, IL
Originally Posted by NightHawk
talk to vince, you actually dont need that sensor and could install a cam from an 06 in there and just ahve it tuned out


id bet with a tune youd be at 165-170ish...depending on weather MAYBE 175 but i WOULDNT bet on it...
Cool, I'm gonna be so excited to start on this mod. I wouldn't mind having a sexy and more powerful car. I gotta work on the body and buy some stuff on ebay to start.

One more question; I can interchange suspension parts from the SS right? I wanna change a few things and make it even more sporty, and place a big sport moniker next to my COBALT letters on the trunk.

I'm excited to do this. Now I gotta raise the cash.
Reply
Old Aug 12, 2009 | 08:24 PM
  #27  
NWAE Cobalt's Avatar
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by cobaltfan10110
Cool, I'm gonna be so excited to start on this mod. I wouldn't mind having a sexy and more powerful car. I gotta work on the body and buy some stuff on ebay to start.

One more question; I can interchange suspension parts from the SS right? I wanna change a few things and make it even more sporty, and place a big sport moniker next to my COBALT letters on the trunk.

I'm excited to do this. Now I gotta raise the cash.
all suspensions are interchangable, yes

and with those mods, if you installed a stg 2 cam you should be up in the 180ish range i would think, at least that is what ive seen

Last edited by NWAE Cobalt; Aug 12, 2009 at 08:24 PM. Reason: Automerged Doublepost
Reply
Old Aug 12, 2009 | 09:35 PM
  #28  
007CobaltLS's Avatar
Senior Member
 
Joined: 08-03-07
Posts: 2,098
Likes: 0
From: Blaine, MN
Originally Posted by NightHawk
talk to vince, you actually dont need that sensor and could install a cam from an 06 in there and just ahve it tuned out
I've emailed him once regarding my plans for my car, but I wasn't planning to go that far bolt-on with my car (only intake, header, dp, cat-back, tune...for MPG's). In the future I was considering FI (when the car is paid off so I can afford any repairs that may go along with it).

Thanks for the info though...I didn't think that was something he could take care of. I'll contact him sometime with some ideas and if that's something he can take care of, then an N/A build may be in my future just for the hell of it.
Reply
Old Aug 12, 2009 | 11:16 PM
  #29  
NWAE Cobalt's Avatar
Senior Member
iTrader: (1)
 
Joined: 07-27-07
Posts: 17,332
Likes: 1
From: Puyallup, WA
Originally Posted by 007CobaltLS
I've emailed him once regarding my plans for my car, but I wasn't planning to go that far bolt-on with my car (only intake, header, dp, cat-back, tune...for MPG's). In the future I was considering FI (when the car is paid off so I can afford any repairs that may go along with it).

Thanks for the info though...I didn't think that was something he could take care of. I'll contact him sometime with some ideas and if that's something he can take care of, then an N/A build may be in my future just for the hell of it.
im in the middle of my n/a build, about to pull the head and build it due to burning oil through the valve guide seals

Originally Posted by 007CobaltLS
I've emailed him once regarding my plans for my car, but I wasn't planning to go that far bolt-on with my car (only intake, header, dp, cat-back, tune...for MPG's). In the future I was considering FI (when the car is paid off so I can afford any repairs that may go along with it).

Thanks for the info though...I didn't think that was something he could take care of. I'll contact him sometime with some ideas and if that's something he can take care of, then an N/A build may be in my future just for the hell of it.
im in the middle of my n/a build, about to pull the head and build it due to burning oil through the valve guide seals

Last edited by NWAE Cobalt; Aug 12, 2009 at 11:16 PM. Reason: Automerged Doublepost
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Supercharged06SS
08-10 SS Turbocharged General Discussion
21
Dec 11, 2022 04:47 PM
taintedred07
2.0L LNF Performance Tech
32
May 28, 2022 03:47 AM
dennis69
Appearance
9
Oct 20, 2015 04:49 PM
no_ss
Problems/Service/Maintenance
11
Oct 18, 2015 11:58 PM
Jesse
Parts
15
Oct 13, 2015 09:32 PM




All times are GMT -4. The time now is 04:00 PM.