jimbos'ss turbo build
Senior Member
Joined: 03-24-07
Posts: 1,732
Likes: 0
From: Santa Clarita, Ca
no no no, not until i have another car after this ones paid off. later i might turn this car into a dedicated road track car. and run it in the nasa series. until then it's gonna stay a high powered dd.
Senior Member
Joined: 08-14-06
Posts: 2,760
Likes: 0
From: San Diego, CA
yah that shouldn't be a problem. do you have a progressive controller or a boost controller like mine? and are you running the lines off the windshield washer reservoir or do you have a trunk mount kit?
what 06black was telling me before was to run 3" from the maf straight to the tb, but keep it short like 5 or 6 inches so it doesn't effect pr building. which means i have to lengthen the harness for the maf(no problem for me). thanks for the info on the vacuum. but is that in hg or psi. i have to purchase a new spring for my bov, and i needed someone with a similar setup to guage from.
what 06black was telling me before was to run 3" from the maf straight to the tb, but keep it short like 5 or 6 inches so it doesn't effect pr building. which means i have to lengthen the harness for the maf(no problem for me). thanks for the info on the vacuum. but is that in hg or psi. i have to purchase a new spring for my bov, and i needed someone with a similar setup to guage from.
Im running the boost controller, and im gonna run it from the winshield washer res. no i don't have the trunk mount. theres alot of wires and stuff i just want to make sure it goes in right. lol
speaking of which, I really need to get my meth injection back in the car, Haven't had time to swing out by Kenny (c/a) and pick up the parts I left there, it's been like 3 months lol.
Senior Member
Joined: 11-21-06
Posts: 2,526
Likes: 0
From: San Diego
one other question, you running it pre or post blower? and do you have a spacer thats allready tapped for a meth nozzle? the reason i ask is i have a spacer that fits between the throttle body and the blower thats allready been tapped and has a meth nozzle in it. but i can't use it for my setup.
Senior Member
Joined: 11-21-06
Posts: 2,526
Likes: 0
From: San Diego
one other question, you running it pre or post blower? and do you have a spacer thats allready tapped for a meth nozzle? the reason i ask is i have a spacer that fits between the throttle body and the blower thats allready been tapped and has a meth nozzle in it. but i can't use it for my setup.
and a tvs
it doesn't matter to me as long as everyones happy i don't care. i do however need a meth nozzle seeing as mine is allready installed on that spacer if someone wants to trade a nozzle for a spacer with nozzle.
Senior Member
Joined: 09-05-07
Posts: 10,662
Likes: 0
From: Sasebo Japan