Only got three runs in cause it started raining. Went with the ingalls as the only mod since the last time i went and it helped alot. With 28 psi, ingalls on 11mm, and Koni's on full soft I could launch at about 2600 and instead of the usually 2100.

1st run tried launching at 2100 like usually but bogged

60 ft---2.31
330 ft -6.43
1/8th-9.76
mph-73

2nd bogged launching at 2300

60 ft---2.34
330 ft -6.47
1/8th--9.80
mph-73

3rd lauched at 2600 and road the clutch, ZERO wheel spin, shifted early into second, bumped rev limiter into 3rd

60ft---2.28
330ft--6.36
1/8th--9.68
mph-73

I could defianlty have gotten into it little earlier the last run and pulled a better time. Going to IRP this tuesday to run on a 1/4mile finally. After some more practice launching hoping to run a 14.8 but will be happy with 14's.

 

How are you running those times with only 160hp?

 

well that is at the wheels comes out to about 188 hp and 176 tq @ the crank

 

most people are referring to whp when they are talking about hp... at least on here they are

 

I know they are but those are times that SS/SC run, and we have alot of hp on them, is it b/c of traction issues or wtf

 

Well i've seen stock ss/sc's run 9.2's so yes, alot has to do with traction and i'm a little lighter.