AVH-p4400 back up camera
#1
New Member
Thread Starter
Join Date: 01-24-10
Location: riverside, NJ
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
AVH-p4400 back up camera
Hey ladies and gentlemen I have a question.
I recently installed the Pioneer AVH-P4400Bh, I have the ipod adapter and have already done the video bypass. My question is im trying to install a backup camera however when im not sure where to hook up the power for the camera. right now i have it tapped into the green wire coming from the driver side reverse light and I still get no picture. The black wire is connected to the black wire form the same light, and the signal cable is plugged int the reverse porton the unit.
I recently installed the Pioneer AVH-P4400Bh, I have the ipod adapter and have already done the video bypass. My question is im trying to install a backup camera however when im not sure where to hook up the power for the camera. right now i have it tapped into the green wire coming from the driver side reverse light and I still get no picture. The black wire is connected to the black wire form the same light, and the signal cable is plugged int the reverse porton the unit.
#2
Senior Member
iTrader: (16)
Hey ladies and gentlemen I have a question.
I recently installed the Pioneer AVH-P4400Bh, I have the ipod adapter and have already done the video bypass. My question is im trying to install a backup camera however when im not sure where to hook up the power for the camera. right now i have it tapped into the green wire coming from the driver side reverse light and I still get no picture. The black wire is connected to the black wire form the same light, and the signal cable is plugged int the reverse porton the unit.
I recently installed the Pioneer AVH-P4400Bh, I have the ipod adapter and have already done the video bypass. My question is im trying to install a backup camera however when im not sure where to hook up the power for the camera. right now i have it tapped into the green wire coming from the driver side reverse light and I still get no picture. The black wire is connected to the black wire form the same light, and the signal cable is plugged int the reverse porton the unit.
dont ground to the harness, ground to the body.
IIRC the camera has a ground. tap the power for it to the reverse light power wire (switched on by the reverse switch on the trans) and ground the ground to the body of the car, not the harness.
Thread
Thread Starter
Forum
Replies
Last Post