How hard is it to swap the stock boost gauge with an aftermarket one. Im planning on putting in a triple a pillar pod with an AEM wideband uego, interceptor and replacing the stock boost gauge with a glowshift boost gauge.

 

extremely easy to do.. even easier if its electrical.. but i would say go mechanical.. there is a how to on here im sure!

 

easy to swap them but you might have the same issue im having right now...iiunno tho. I had a 140kpa gauge (20psi)....im hitting 130kpa (18psi) of boost....i changed to a 30psi gauge from the ss/tc cuz im installing a TVS....still have the m62 on and its saying im hitting 25psi. Computer doesnt know i swapped the gauges and its sending the needle to the same spot. So just make sure its the same measurements

 

How is this in the How To section??

 

I just did it today. If you have any questions PM me and i'll help you

 

hey man i wanna do the triple gauge pillar and wanna do a boost gauge wideband and oil pressure. can i take out y stock boost gauge and swap it with another? let me kno and how to do it, thanks!

 

Yes you can take out your stock boost gauge, but you won't need the wiring for it, you will be supplied with everything when you get the new gauge.

I made this lastnight. It's super easy. Power the gauge, and tap into the boost line with a T fitting.