JBP Cams Revisited: New Grind for `09!
02-26-2009, 01:45 PM
#26
Banned
Thread Starter
Join Date: 07-04-06
Location: Toronto
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
LSJ and L61 cams are interchangeable up until 2006.
The only difference is the timing;
'06 L61 116 Intake, -103 Exhaust
'06 LSJ 100 Intake, -115 Exhaust
2007 L61 intake cams are not interchangeable with any other ecotec cams.
2007 L61 exhaust cams are interchangeable backwards to a previous model year L61 or LSJ
LNF and LE5 exhaust cams are interchangeable with each other but not with any other ecotec cams.
All LSJ cams are interchangeable.
Thanks,
JBP
The only difference is the timing;
'06 L61 116 Intake, -103 Exhaust
'06 LSJ 100 Intake, -115 Exhaust
2007 L61 intake cams are not interchangeable with any other ecotec cams.
2007 L61 exhaust cams are interchangeable backwards to a previous model year L61 or LSJ
LNF and LE5 exhaust cams are interchangeable with each other but not with any other ecotec cams.
All LSJ cams are interchangeable.
Thanks,
JBP
02-26-2009, 01:53 PM
#27
Senior Member
Join Date: 11-27-07
Location: MD
Posts: 1,708
Likes: 0
Received 0 Likes
on
0 Posts
LSJ and L61 cams are interchangeable up until 2006.
The only difference is the timing;
'06 L61 116 Intake, -103 Exhaust
'06 LSJ 100 Intake, -115 Exhaust
2007 L61 intake cams are not interchangeable with any other ecotec cams.
2007 L61 exhaust cams are interchangeable backwards to a previous model year L61 or LSJ
LNF and LE5 exhaust cams are interchangeable with each other but not with any other ecotec cams.
All LSJ cams are interchangeable.
Thanks,
JBP
The only difference is the timing;
'06 L61 116 Intake, -103 Exhaust
'06 LSJ 100 Intake, -115 Exhaust
2007 L61 intake cams are not interchangeable with any other ecotec cams.
2007 L61 exhaust cams are interchangeable backwards to a previous model year L61 or LSJ
LNF and LE5 exhaust cams are interchangeable with each other but not with any other ecotec cams.
All LSJ cams are interchangeable.
Thanks,
JBP
02-26-2009, 04:34 PM
#28
Banned
Thread Starter
Join Date: 07-04-06
Location: Toronto
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
02-26-2009, 05:07 PM
#30
Senior Member
Join Date: 11-27-05
Location: Weston, FL
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
LSJ and L61 intake cams are interchangable. However, the exhaust cams are not due to the hex fitting in the end of the LSJ exhaust cam.
02-28-2009, 08:53 AM
#33
Senior Member
If they work how you say they will, just a direct replacement then I KNOW a lot of members on the forums and especially over at RLF will hop on this in a heartbeat.
Keep us informed!
Keep us informed!
03-05-2009, 09:53 AM
#37
Senior Member
iTrader: (1)
Join Date: 12-16-07
Location: S.A
Posts: 4,442
Likes: 0
Received 0 Likes
on
0 Posts
Who wants camshafts??
We're going to be working on a new grind for `09. One that we're hoping will exceed our stage 2 in gains, power and sound.
But here's the kicker, we're trying to go for a full Billet Steel replacement. Which means, no core charges/exchanges, no regrinds and increased strength with billet steel composition.
We've been doing the billet steel camshaft thing for the ECOTEC for a while now, however, there was no grind specific to them. We'd do our stage 2 grind, custom grind or race grind which is not computer friendly, extremely high lift and difficult to tune.
Possibilities:
*Price to be determined
So we're taking it down a notch, proposing a new grind and trying to do a massive run of these in order to offer a real steal for their introduction. Remember, we can only offer killer deals when we get a huge number of people involved. If you want billet camshafts cheap, sign on as interested and we'll start the development and testing required.
We're going to be working on a new grind for `09. One that we're hoping will exceed our stage 2 in gains, power and sound.
But here's the kicker, we're trying to go for a full Billet Steel replacement. Which means, no core charges/exchanges, no regrinds and increased strength with billet steel composition.
We've been doing the billet steel camshaft thing for the ECOTEC for a while now, however, there was no grind specific to them. We'd do our stage 2 grind, custom grind or race grind which is not computer friendly, extremely high lift and difficult to tune.
Possibilities:
- Brand new Billet Steel Camshafts
- Non-Regrind
- Billet Steel Strength
- Entirely New Grind
- No modified base circle
- No Core Charges/Exchanges
- Brand New Cams for under $450*
- Return your old cam cores for refund*
*Price to be determined
So we're taking it down a notch, proposing a new grind and trying to do a massive run of these in order to offer a real steal for their introduction. Remember, we can only offer killer deals when we get a huge number of people involved. If you want billet camshafts cheap, sign on as interested and we'll start the development and testing required.
wut about the people who JUST ordered cams.. im feeling slightly disappointed.. I ordered the triflows and solid lifters two weeks ago and now this, kinda disheartening.
