Anyone notice when you hit hard bumps the lights shake. My passenger side only does it, drive me nuts sometimes.

 

bump.

 

Most likely you didnt get the lower "T" piece slipped in with the headlight bucket most likely. Mine did this but took a look at it and noticed the headlight was sitting ontop of the bucket instead of sliding into it.

 

^the passenger side is a pain in the ass to get into the slot though, drivers will go right in 1st time everytime.

 

Yea I checked, its in there. I checked to see if the bulb was loose to but its not. Just seeing if anyone else has had the problem...I noticed some people had this problem with the gen 3's. I'll just let it go, theirs probably nothing you can do anyway.

 

Yeah had the same issue. Just takes some time. Though you have to be careful. I accidently broke off 1 of the tabs. But it still works fine and doesnt bounce.

 

did the cracking lense issue get resolved? i wont be able to get HID's right away so i dont want them to crack before i do

 

bump

 

I heard they fixed it but I still wouldn't risk it, I put HID's in mine right away. I have heard of the stress cracks happening after 2weeks.

 

I'm pushing it with mine...I installed mine w/o the HID's. I will have my HID's in a week or so...so that will be about 10 days tops without them. Hoping there is no stress cracking...otherwise I'll try to get a new pair one way or another.

 

Here is a pic of mine installed. Thanks and MP

 

hopefully putting mine in thursday. il be sure to post pics

 

I've had these (Gen 4 Depo) for almost a year now with standard Bulbs. No problems whatsoever. No lens cracking at all.

 

Just posted this, but I'll say it again...standard bulbs in for 10 months...lenses like new.
I do turn off my DRLs though.

 

It's fine now lol. I got them, but I'm not putting them in until end of April, early may and I have HIDs on the way right now

 

tried hooking these up today with hids and didnt quite work out haha idk what i did wrong. fogs worked though.

 

So they obviously fixed it then.

 

^ I had the halogen bulbs in mine for several months with drl's ON and no issues

 

i had these in black for about 6 months. the fit was terrible on the passenger side, it wouldnt fit flush at all, about an inch away from the hood. other than that they are the best looking lights for the cobalt.

i have to buy some new ones, ill prolly just buy some black stockers and save $ and have a better fit

 

i have a feeling you didnt get both of the tabs in, because my fitment was like that then i took them out because one of the fogs didnt work and when i put it back in it fit great. so damn hard to get them in right thouhg haha

 

it would probably be easier to get it in, with your bumper off

 

Yea it takes some time to get these to fit right. The tabs can be a pain.

 

Can someone post up some night pics of the output with hids??

 

give me a few days and i might

 

I spent hours trying to get it. I'm sure it must have had a defect