Hi! I just bought an 08 SS / TC and I NNEEDD help!!
#1
New Member
Thread Starter
Hi! I just bought an 08 SS / TC and I NNEEDD help!!
It's a maroon one with the G85.
ZZP turbo piping
Catless downpipe
HP tuned
Bigger ZZP intercooler
Lightweight radiator
But my airbag light is on!! I have the codes for it and am looking for some help.... I am not sure where to even start diagnosing this issue? I can give the codes. Let me know if anyone can help. Thanks!
ZZP turbo piping
Catless downpipe
HP tuned
Bigger ZZP intercooler
Lightweight radiator
But my airbag light is on!! I have the codes for it and am looking for some help.... I am not sure where to even start diagnosing this issue? I can give the codes. Let me know if anyone can help. Thanks!
#2
probably the passenger airbag sensor. Mine went bad on my 08 at around 60k miles
cost $~500 from the dealer to get replaced.
take it to them to get the code and then go from there.
cost $~500 from the dealer to get replaced.
take it to them to get the code and then go from there.
#3
New Member
Thread Starter
I have a code for that, but I also have other codes... here they are... what do you think?
B1000 - Symptom 31. ECU performance?
B0012 (0D) - Driver frontal deployment loop stage 1 resistance above threshold
B0013 - Driver frontal deployment loop stage 2
B0081 - Passenger presence system (common seat belt issue?)
B3031 - Theft system (security system controller in learn mode) KEYS???
B3055 - Theft system (no transponder modulation or transponder) KEYS???
B3060 - Unprogrammed transponder identification code received KEYS???
B1000 - Symptom 31. ECU performance?
B0012 (0D) - Driver frontal deployment loop stage 1 resistance above threshold
B0013 - Driver frontal deployment loop stage 2
B0081 - Passenger presence system (common seat belt issue?)
B3031 - Theft system (security system controller in learn mode) KEYS???
B3055 - Theft system (no transponder modulation or transponder) KEYS???
B3060 - Unprogrammed transponder identification code received KEYS???
#4
Wow.
Looks like someone was trying to program keys with a tech2 and left it?
b0081 is the code for passenger seat belt sensor. its got a weight sensor to verify if someone is sitting in the seat
the others I dont know about.
Looks like someone was trying to program keys with a tech2 and left it?
b0081 is the code for passenger seat belt sensor. its got a weight sensor to verify if someone is sitting in the seat
the others I dont know about.
#5
New Member
Thread Starter
So either way, I am probably going to have to fix that seat belt sensor because the code is there huh?
As far as someone programming the key, codes 3031, 3055, 3060, are all probably because someone didn't program the keys correctly?
As far as someone programming the key, codes 3031, 3055, 3060, are all probably because someone didn't program the keys correctly?
The following users liked this post:
Dillpickler (02-28-2018)
Thread
Thread Starter
Forum
Replies
Last Post