Nitrous Oxide N20

installing my zex kit now...advice?

Thread Tools
 
Search this Thread
 
Old 09-05-2008, 01:14 PM
  #1  
Junior Member
Thread Starter
 
Balt36's Avatar
 
Join Date: 05-06-05
Location: tip of jerz
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
installing my zex kit now...advice?

I am attempting to start the install of my zex wet kit for my 2.2 Anyone here done this already and has any advice pleaseeeeeee do. thanks guys

bumppppp

Last edited by Balt36; 09-05-2008 at 01:14 PM. Reason: Automerged Doublepost
Old 09-05-2008, 01:20 PM
  #2  
Senior Member
 
Kibosh3's Avatar
 
Join Date: 06-13-07
Location: Woodbridge, ON
Posts: 1,161
Likes: 0
Received 0 Likes on 0 Posts
post up if u have questions... i may be of some assistance.
Old 09-05-2008, 01:23 PM
  #3  
Senior Member
 
originaladrian's Avatar
 
Join Date: 01-22-06
Location: S.FL
Posts: 8,396
Likes: 0
Received 0 Likes on 0 Posts
N20 kits are simple, if hou have any automotive electrical wiring experience you are good to go. the fuel tap is rite there from the shrader valve
Old 09-05-2008, 02:41 PM
  #4  
Junior Member
Thread Starter
 
Balt36's Avatar
 
Join Date: 05-06-05
Location: tip of jerz
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
Thanks guys...i am sure ill be back with a few questions after a few steps...

where should i install my nitrous injection in my intake? whats the best spot?

Last edited by Balt36; 09-05-2008 at 02:41 PM. Reason: Automerged Doublepost
Old 09-05-2008, 03:00 PM
  #5  
Senior Member
 
Dunkinuts's Avatar
 
Join Date: 10-28-07
Location: Tall Timbers, MD
Posts: 3,713
Likes: 0
Received 0 Likes on 0 Posts
about 6 inches min. from the TB
Old 09-05-2008, 08:48 PM
  #6  
Junior Member
Thread Starter
 
Balt36's Avatar
 
Join Date: 05-06-05
Location: tip of jerz
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
shes all installed!!! ill have pics up tomorrow! thanks!
Old 09-05-2008, 08:48 PM
  #7  
Senior Member
 
XM15's Avatar
 
Join Date: 05-16-06
Location: CT
Posts: 6,298
Likes: 0
Received 0 Likes on 0 Posts
Just watch out for the welds on the intake manifold.






Sorry, had to say it.
Old 09-07-2008, 09:36 AM
  #8  
Banned
 
CBodnar's Avatar
 
Join Date: 04-06-07
Location: New Jersey
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Balt36
Thanks guys...i am sure ill be back with a few questions after a few steps...

where should i install my nitrous injection in my intake? whats the best spot?
6-12 inches away from the throttle body. i believe your kit should say this.

Originally Posted by Balt36
shes all installed!!! ill have pics up tomorrow! thanks!
oh snap. didn't see this. please get a video camera and post up the video of your brother from a 20mph roll. also make sure you have the right jets in there so your safe. better safe than sorry.

Last edited by CBodnar; 09-07-2008 at 09:36 AM. Reason: Automerged Doublepost
Old 09-07-2008, 09:59 AM
  #9  
Junior Member
Thread Starter
 
Balt36's Avatar
 
Join Date: 05-06-05
Location: tip of jerz
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
yup! last step is my window swotch and gauge which im installing today! should get a test run b4 the track on friday! watch out russo 29! 20 roll here i come!
Old 09-07-2008, 10:06 AM
  #10  
Banned
 
CBodnar's Avatar
 
Join Date: 04-06-07
Location: New Jersey
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Balt36
yup! last step is my window swotch and gauge which im installing today! should get a test run b4 the track on friday! watch out russo 29! 20 roll here i come!
test run? island today?
Old 09-07-2008, 10:15 AM
  #11  
Junior Member
Thread Starter
 
Balt36's Avatar
 
Join Date: 05-06-05
Location: tip of jerz
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
test run in a few days...still got a few things to touch up n and recheck all my lines for any leask...and also im a ****** idiot and over torqued a bolt and it snapped. waiting for a new line to come in the mail b4 i can run it : (
Old 09-07-2008, 10:18 AM
  #12  
Banned
 
CBodnar's Avatar
 
Join Date: 04-06-07
Location: New Jersey
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Balt36
test run in a few days...still got a few things to touch up n and recheck all my lines for any leask...and also im a ****** idiot and over torqued a bolt and it snapped. waiting for a new line to come in the mail b4 i can run it : (
sucks. when is it supposed to come in?
Old 09-07-2008, 10:20 AM
  #13  
Junior Member
Thread Starter
 
Balt36's Avatar
 
Join Date: 05-06-05
Location: tip of jerz
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
monday or tuesday....ill b ready for the track on friday whaaaahahaa whhahahaha < evil laugh >
Old 09-07-2008, 10:22 AM
  #14  
Member
 
HOT CARLS SS's Avatar
 
Join Date: 12-04-07
Location: Hamilton, Ont.
Posts: 317
Likes: 0
Received 0 Likes on 0 Posts
CBodnar...what NOS kit are you running? How much did it cost you and from were? And what shot did you run too get 116mph in the 1/4? Thanx...

Almost forgot won't a dry kit be better for our cars with the 2.0L supercharged as the intake manifold would puddle up easily with adding fuel? Also can you run a wet shot through the supercharger????





Old 09-07-2008, 10:51 AM
  #15  
Banned
 
CBodnar's Avatar
 
Join Date: 04-06-07
Location: New Jersey
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by HOT CARLS SS
CBodnar...what NOS kit are you running? How much did it cost you and from were? And what shot did you run too get 116mph in the 1/4? Thanx...

Almost forgot won't a dry kit be better for our cars with the 2.0L supercharged as the intake manifold would puddle up easily with adding fuel? Also can you run a wet shot through the supercharger????





i am still on gm stage 2 tune so wet kit is better. i am running a 36nitrous jet/22fuel jet. from what i have been told it is a 45wet shot. i run my shot 6inches away from the throttle body and it is a wet kit also still using the stock intake with just a filter and cut the end box off. i have run tests and had injen cai on my car and the way i modded my stock airbox it is the same as a injen cai.
Old 09-08-2008, 12:47 PM
  #16  
Senior Member
 
Dunkinuts's Avatar
 
Join Date: 10-28-07
Location: Tall Timbers, MD
Posts: 3,713
Likes: 0
Received 0 Likes on 0 Posts
bump for install pictures.
Old 09-08-2008, 02:11 PM
  #17  
Banned
 
CBodnar's Avatar
 
Join Date: 04-06-07
Location: New Jersey
Posts: 901
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Dunkinuts
bump for install pictures.
i am at work however i just drew this up for you. top part is my windshield. lower park is my engine. basically what it looks like. 2 red things are the solenoids. other thing is a close up of where it sprays into the intake.



Old 09-08-2008, 07:12 PM
  #18  
Senior Member
 
Dunkinuts's Avatar
 
Join Date: 10-28-07
Location: Tall Timbers, MD
Posts: 3,713
Likes: 0
Received 0 Likes on 0 Posts
bump
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
taintedred07
2.0L LNF Performance Tech
32
05-28-2022 03:47 AM
dennis69
Appearance
9
10-20-2015 04:49 PM
justinchinn
General Cobalt
3
10-02-2015 12:18 PM
Jesse
Problems/Service/Maintenance
2
09-28-2015 12:51 PM
metroplex
Appearance
0
09-27-2015 07:48 AM



Quick Reply: installing my zex kit now...advice?



All times are GMT -4. The time now is 08:51 PM.