Minnesota chat 2010 ( . )( . )
Mike - ya I keep all my stock parts too. Pff its been over a year and I still have some ms3 stuff that I need to dump.
e85 tune with light mods...ya that should be close I'd say more if you get a real good tune, that 2.8 pulley should do some work. Although you may want to consider new/ported exhaust manifold and downpipe if your cat back is 3" already.
e85 tune with light mods...ya that should be close I'd say more if you get a real good tune, that 2.8 pulley should do some work. Although you may want to consider new/ported exhaust manifold and downpipe if your cat back is 3" already.
Thread Starter
Senior Member
Joined: 11-09-04
Posts: 9,440
Likes: 0
From: Minnesota
Senior Member
Joined: 06-08-08
Posts: 1,816
Likes: 0
From: Minneapolis
New Member
Joined: 03-10-10
Posts: 99
Likes: 0
From: MN
Ron at RSmotors is tuning my car. I just got my dyno done and will be scanning it in a minute. Got pretty decent numbers for only cai and catback. Better than I expected on a mustang dyno.
k, now here is my graph on the mustang dyno. A little hard to read the numbers on the bottom but I was putting down 223hp and 194tq one run and 193tq another. My boost was at 11.4
[IMG]
[/IMG]
Oh, and this is still without him touching anything. Just getting numbers to begin with and tuning is Saturday.
k, now here is my graph on the mustang dyno. A little hard to read the numbers on the bottom but I was putting down 223hp and 194tq one run and 193tq another. My boost was at 11.4
[IMG]
[/IMG]Oh, and this is still without him touching anything. Just getting numbers to begin with and tuning is Saturday.
Last edited by ztkells; Apr 20, 2010 at 01:48 PM. Reason: Automerged Doublepost
sweet new members! 
welcome guys!
z - stock with just those, 22xwhp isnt bad! like I said I think you'll be like 260+ with e85 and a good tune with a pulley that small. But im not THAT familiar with the lsj yet.
welcome guys!z - stock with just those, 22xwhp isnt bad! like I said I think you'll be like 260+ with e85 and a good tune with a pulley that small. But im not THAT familiar with the lsj yet.
holy **** serious?! cool a new member bought it! awesome
keep it in the family right?
silver you get more parts? My downpipe shall be here end of the month, and then I was going to order the ottp derlin trailing bushing thing that just came out so I'll have some solid ass control arms.
keep it in the family right?
silver you get more parts? My downpipe shall be here end of the month, and then I was going to order the ottp derlin trailing bushing thing that just came out so I'll have some solid ass control arms.
Senior Member
Joined: 05-17-09
Posts: 719
Likes: 0
From: Minnesota
holy **** serious?! cool a new member bought it! awesome
keep it in the family right?
silver you get more parts? My downpipe shall be here end of the month, and then I was going to order the ottp derlin trailing bushing thing that just came out so I'll have some solid ass control arms.
keep it in the family right?
silver you get more parts? My downpipe shall be here end of the month, and then I was going to order the ottp derlin trailing bushing thing that just came out so I'll have some solid ass control arms.
I just was taking a dump in the bathroom (single bathroom, unisex) at work. Get up look, its a big green ***** looking one, giggle. Then go to wash my hands, only the cold water works...odd. So I walk out the bathroom, just start walking down the hall and the HR lady and the plumber walk in, then enter the bathroom... :S yikes! i forgot to spray febreez in there! Sit at my desk...write a email, the guy that has a office across the hall of the bathroom walks in laughing saying it smelled like someones intestines fell out in the bathroom...I laugh my ass off saying it was me...hahaha poor plumber....